Overview
The Omix-ADA self adjusting wheel kit, part number 16739.04, is a passenger side rear drum brake self adjuster hardware kit for 10″x1-3/4″ brakes. Omix-ADA builds it to the original specifications as a direct OE replacement for Jeep applications.
The kit fits the passenger side rear position only. The driver side rear wheel needs its own kit.
Key features
- Self adjusting design for the passenger side rear drum brake
- Sized for 10″x1-3/4″ brakes
- Built to original specifications by Omix-ADA as a direct OE replacement
- Covered by a limited five year warranty from Omix-ADA.
Self adjusters and drum brake care
A self adjuster keeps the drum brake shoes close to the drum as the lining wears, which keeps pedal travel consistent. When the adjuster sticks, the shoes can drag, overheat the drum and wear unevenly. Pedal height that drops over time, or a pull to one side under braking, often points to adjuster or shoe contact problems.
When servicing drum brakes, inspect the wheel cylinder for leaks, the springs for fatigue and the drum surface for scoring. Clean the backing plate and lubricate the contact points where the shoes sit, but keep grease off the lining. Replacing hardware in matched sets helps both sides of the axle brake evenly.
Drum brakes are less common on the front of modern vehicles, but many older rear axles still use them. Adjusting the brakes after a new kit is installed and test driving at low speed before normal use is a sensible step.
- Inspect wheel cylinders for leaks
- Check springs and hold-down hardware for wear
- Clean the backing plate before assembly
- Keep grease off the friction lining
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | 16739.04 |
| UPC | 804314071998 |
| Position | Passenger side rear |
| Brake size | 10″x1-3/4″ |
| Type | Self adjusting wheel kit |
| Warranty | Limited five year warranty from Omix-ADA |
Vehicle fitment
Built for Jeep applications. Confirm fit for your vehicle’s year, model and trim before ordering, and compare the rear drum size and wheel position with your Jeep.
Compare the rear drum size and wheel position against your Jeep’s specifications before installing. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Check the components against your installation before starting.









