Overview
The 16533.04 is a rear axle key for AMC Model 20 axles. It comes with a nut and washer kit and fits the 1976–1983 Jeep CJ5, the 1976–1986 Jeep CJ7 and the 1981–1985 Jeep Scrambler.
The key transfers torque from the axle shaft to the hub, so the hub turns with the shaft. It is built to the original specifications.
Key features
- Rear axle hub drive key for the AMC Model 20
- Nut and washer kit listed with the key
- Built to original specifications
- Rear position
What the hub drive key does
On an AMC Model 20 axle, the drive key sits in a slot between the axle shaft and the hub. It carries the turning force, so the wheel hub spins with the shaft rather than slipping. A key that is sheared, rounded or missing lets the hub drift, which quickly damages the slot and the shaft end.
When fitting a new key, check that the slot is clean and free of burrs, and that the key sits square without forcing it. Older Jeeps often show wear at the keyway after years of use, so inspect the shaft end at the same time. Because the nut and washer hold the hub on, replace them if their threads look worn or stretched.
- Inspect the keyway and shaft end for wear
- Replace the nut and washer if threads look damaged
- Check hub fit after the first drive
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 16533.04 |
| UPC | 804314126421 |
| Position | Rear |
| Axle | AMC Model 20 |
| Included | Nut and washer kit |
Vehicle fitment
It fits the 1976–1983 Jeep CJ5 (Base, Golden Eagle, Laredo, Limited and Renegade), the 1976–1986 Jeep CJ7 and the 1981–1985 Jeep Scrambler, across the trim levels for each.
Wrangler (YJ) and Cherokee (XJ) models are not on this list, and years outside the three model ranges are not covered. Confirm your vehicle’s year, model and trim before ordering.
What’s included
A nut and washer kit is listed with the key.









