Overview
The Omix-Ada 18058.04 is a long passenger side tie rod end for 1991–1995 Jeep Wrangler (YJ) models. It connects steering knuckle to steering knuckle with a 3/4 thread diameter, and it is a direct fit.
Key features
- Passenger side, right position
- Long steering knuckle to steering knuckle design
- 3/4 thread diameter
- Direct fit listing for the 1991–1995 YJ
Thread size and fit
This long tie rod end uses 3/4 thread, which differs from the 7/8 thread on the 1987–1990 YJ, so compare threads before buying parts for the other years. Thread mismatch is a common reason a replacement end will not seat on the tie rod. Confirm the thread on your existing tie rod before you start the job.
Long tie rod ends are often swapped with the other side when one wears out, since both sides share age and use. After installation, have the front toe set and check that the steering returns to center without binding. Keep the boot and nut in good shape and recheck the joint after the first few trips.
- Measure the existing thread before ordering
- Check the other side for play
- Recheck the nut and boot after several trips
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 18058.04 |
| UPC | 804314051334 |
| Part type | Long tie rod end |
| Position | Right |
| Thread diameter | 3/4 |
| Connection | Long steering knuckle to steering knuckle |
Vehicle fitment
It fits the 1991–1995 Jeep Wrangler (YJ) in Base, Islander, Renegade, Rio Grande, S, SE and Sahara trims.
The 1987–1990 Wrangler YJ uses a 7/8 thread tie rod end under part number 18058.03, so those years are not covered here. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 3/4 thread diameter differs from the 7/8 used on the 1987–1990 YJ, so match the thread to your existing tie rod.
What’s included
One long passenger side tie rod end is included, with no other parts.









