Overview
The Omix-ADA 17724.02 is a fuel sending unit that bolts into the fuel tank. It fits 1955–1958 Jeep Willys CJ-3 and CJ-5 models, and 1959–1960 Jeep CJ3 and CJ5 models in Base trim.
It carries a limited five year warranty from Omix-ADA.
Key features
- Bolts into the fuel tank
- Covers 1955–1960 Jeep CJ-3 and CJ-5 models
- Limited five year warranty from Omix-ADA
- Part number 17724.02 from Omix-ADA
Tank sender fitting notes
A bolt-in fuel sender mounts to a flange on the top of the tank, so fitting is largely a matter of matching the flange, seal and mounting holes. Check the flange for flatness and the mounting holes for thread damage before installing. Old tanks can have a warped flange that prevents a clean seal.
The float arm on this type of sender moves the gauge needle through a resistance track. Make sure the arm rests freely and that the float does not touch the tank bottom or sides once fitted. A binding or bent arm gives inaccurate readings even with a correct install.
Work with the battery disconnected and keep the tank opening covered when parts are removed. Fuel system work near a warm engine carries fire risk, so keep sparks and open flames well clear. Check for leaks at the flange after the first fill.
- Check the mounting flange for flatness
- Confirm the float moves freely
- Replace the flange seal when the sender is removed
- Keep the tank opening covered during work
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | 17724.02 |
| UPC | 804314015718 |
| Type | Fuel sending unit |
| Mounting | Bolts into tank |
| Years covered | 1955–1960 |
| Warranty | Limited five year warranty from Omix-ADA |
Vehicle fitment
It fits these vehicles:
- 1955–1958 Jeep Willys CJ-3
- 1955–1958 Jeep Willys CJ-5
- 1959–1960 Jeep CJ3 (Base)
- 1959–1960 Jeep CJ5 (Base)
Years outside 1955–1960 and the Willys CJ-2 are not in this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One fuel sending unit, part number 17724.02.









