Overview
The Omix-ADA 17724.03 is a fuel sender unit for 4 cylinder engines in 1968–1971 Jeep CJ5 and CJ6 models in Base trim.
It is a direct fit for those model years and comes with a limited five year warranty from Omix-ADA.
Key features
- Designed for 4 cylinder engines
- Fits 1968–1971 Jeep CJ5 and CJ6, Base trim
- Direct fit for the 1968–1971 CJ5 and CJ6 Base models.
- Part number 17724.03 from Omix-ADA
Checking the sender circuit
A fuel sender sends the fuel level to the dash gauge through a changing electrical signal, so the gauge can only be as accurate as the sender and its wiring. On older CJ5 and CJ6 models, a worn sender may stick near empty or full, while a poor connection can produce a gauge that jumps. Test the circuit before replacing the sender if the symptoms are intermittent, because corroded terminals are common on these vehicles.
When the tank is open, inspect the float arm, the mounting flange and the tank surface. A float arm that binds or leans will produce false readings. Replace the seal if it shows hardening or cracks, and keep the wiring away from the exhaust and any moving parts. Avoid fuel spills and open flames during the work.
- Test the gauge circuit for corrosion
- Check the float arm moves freely
- Route the wiring clear of heat
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | 17724.03 |
| UPC | 804314019952 |
| Type | Fuel sender unit |
| Engine | 4 cylinder |
| Years | 1968–1971 |
| Warranty | Limited five year warranty issued by Omix-ADA |
Vehicle fitment
It fits these vehicles, Base trim on both:
- 1968–1971 Jeep CJ5 (Base)
- 1968–1971 Jeep CJ6 (Base)
Other CJ years and models are not covered. Confirm your vehicle’s year, model and trim before ordering, and confirm the engine is a 4 cylinder.
What’s included
One fuel sender unit, part number 17724.03.









