Overview
It is a new replacement fuel pump for Jeep CJ and YJ models. It is designed for 1974–90 CJ and YJ applications with 232 or 258 six cylinder engines, and for 1983–86 CJ applications with an AMC four cylinder engine.
This pump is new rather than remanufactured, and a mounting gasket is included. Its fuel inlet faces the firewall, which suits CJ applications. Some YJ setups need attention to inlet direction, covered below.
Key features
- New pump, not remanufactured
- Mounting gasket included
- Fuel inlet faces the firewall, matching CJ applications
- Stock flow and stock pressure ratings with a natural finish
Fuel inlet direction
Inlet direction decides how the fuel line must run from the tank to the pump. When the inlet faces the firewall, the line reaches the pump from a different angle than it does on a pump facing the grille, so the line may need a new bend or a short length of reinforced hose to avoid kinks.
Before fitting the pump, dry-fit the line and check that it clears the engine, the bracket and the steering components. Hose should be fuel-rated and secured with proper clamps so it does not rub or chafe against the frame.
- Dry-fit the line before tightening the pump bolts
- Use fuel-rated hose where a longer run is needed
- Keep the line clear of exhaust heat and moving parts
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | OAI17709.06 |
| Finish | Natural |
| Flow rating | Stock |
| Pressure rating | Stock |
| Engine applications cited | 232 and 258 six cylinder; 4.2L six cylinder; AMC four cylinder (1983–86 CJ) |
| Included | Mounting gasket |
Vehicle fitment
Manufacturer fitment lists 1974–1983 Jeep CJ5 (Base, Golden Eagle, Laredo, Limited, Renegade), 1974–1975 CJ6 (Base), 1976–1986 CJ7, 1981–1985 Scrambler and 1987–1990 Wrangler (YJ) models.
Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
On 1987–90 YJ applications the stock pump’s inlet faces the grille, while this pump’s inlet faces the firewall. The stock fuel line may need to be re-bent, or a longer length of rubber hose may be needed to reach the inlet.
What’s included
The mounting gasket is included.
Not included: a longer fuel hose, which may be needed on 1987–90 YJ applications.









