Overview
The 16722.03 is a front wheel cylinder for 9 inch brakes, usable on the driver or passenger side. It fits the 1959–1960 CJ3, CJ5 and CJ6 and the Willys CJ-3, CJ-5 and CJ-6 from 1954 to 1958.
Omix-ADA builds it as a direct OE replacement to the original specifications.
Key features
- Front wheel cylinder
- For 9 inch brakes
- Driver or passenger side
- Direct OE replacement
- Limited five-year warranty
Drum brake wheel cylinders
A wheel cylinder sits at the top of each drum brake shoe pair. Brake fluid pressure from the master cylinder pushes its pistons outward, forcing the shoes against the drum. Because the cylinder works every time the pedal is pressed, seals wear over time and the pedal may sink or the brake may pull to one side.
When replacing a cylinder, check the drum and shoes for wear, and inspect the backing plate and brake hose at the same time. Compare the bore and mounting style with the old cylinder before buying, and bleed the system after installation. Brake shoes are often replaced along with a cylinder, and the cylinder on the opposite side should be inspected too, since both sides have seen similar use.
- Look for fluid on the backing plate
- Check the pistons for scoring
- Inspect the brake hose for cracks
- Bleed the system after fitting
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 16722.03 |
| UPC | 804314014087 |
| Product type | Drum brake wheel cylinder |
| Position | Front |
| Brake size | 9 inch |
| Side | Driver or passenger |
| Fit type | Direct fit |
| Warranty | Limited five years |
Vehicle fitment
It fits the 1959–1960 CJ3, CJ5 and CJ6, and the Willys CJ-3 (1954–1958), CJ-5 (1955–1958) and CJ-6 (1956–1958).
CJ models after 1960 are not on the list. Confirm your vehicle’s year, model and trim before ordering.









