Overview
The Omix-ADA 17210.15 is an in-dash engine temperature gauge for water temperature, built to original specifications as a factory match for Jeep. It is an electric standard-size gauge with a black face.
Omix-ADA presents it as an O.E. replacement for the dash gauge, meaning it is intended to take the place of the original unit.
Key features
- In-dash water temperature gauge
- Factory match Jeep design
- Electric standard size
- Black face color
Sender and wiring checks
A water temperature gauge depends on its sender and the wiring between the sender and the dash, so both should be checked when the gauge is replaced. Make sure the sender type matches the gauge and that the connector is clean and tight. Loose or corroded connections can cause readings that jump or stay low, which can look like a cooling problem.
Overheating is a serious condition, so the gauge should be trusted only after the sender and wiring are verified. Compare the gauge reading on a cold start and during a short drive, watching for steady movement. If the gauge reads high, check the coolant level and cooling system before assuming the gauge is at fault.
- Match the sender type to the gauge
- Clean and tighten the sender connector
- Watch the reading on a cold start
- Check coolant level if the reading runs high
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | 17210.15 |
| UPC | 804314235390 |
| Gauge type | Water temperature |
| Mounting | In-dash |
| Electric or mechanical | Electric |
| Mounting size | Standard |
| Face color | Black |
Vehicle fitment
It is a factory match design for Jeep, so compare it with the original temperature gauge in your model before fitting it.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The in-dash engine temperature gauge.









