Overview
The Omix-ADA 16751.14 is an emergency brake cable equalizer for the 1987 to 1995 Jeep Wrangler YJ. An equalizer joins the parking brake cable to the wheel cables so the braking tension is shared between the two sides.
Because its fitment is stated only for the YJ years given here, check your Wrangler’s model year before you install it.
Working with the cable system
An emergency brake cable equalizer joins the parking brake cable to the wheel cables so the pull is shared between the two rear brakes. On older Wranglers, the cables and guides often stiffen with age, so a new equalizer can only balance the load if the cables move freely. A worn equalizer may cause one side to grip harder, which is often felt as a parking brake that pulls the vehicle to one side.
Before fitting the part, look over the cable ends, sheaths and guide clips for wear, corrosion or stiffness. Lubricate the pivot points where the equalizer rotates, then adjust the parking brake so both rear wheels resist rolling evenly. Retest the parking brake on a slope after the work.
- Parking brake cable ends
- Cable sheaths and guide clips
- Equalizer pivot points
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | 16751.14 |
| UPC | 804314050177 |
| Part type | Emergency brake cable equalizer |
| Application | 1987 to 1995 Jeep Wrangler YJ |
Vehicle fitment
It is built for the 1987 to 1995 Jeep Wrangler YJ.
Later Wrangler generations such as the TJ and JK fall outside the 1987 to 1995 range and are not covered. Confirm your vehicle’s year, model and trim before ordering.
What’s included
An emergency brake cable equalizer is included. Check the package contents against your installation before starting.









