Overview
The Omix-ADA 16751.06 is a parking brake equalizer bar for 10-inch brakes, sold for either the passenger or driver side. An equalizer bar connects the parking brake cable to the wheel cables so tension is shared between the two sides.
This Omix-ADA part is a direct replacement equalizer for a 10-inch brake setup. It is offered for either the passenger or driver side.
How the parking brake balances
The equalizer bar works as a pivot between the parking brake cable and the two rear wheel cables. When the lever is applied, the bar lets each side take up cable tension evenly, so one wheel does not clamp harder than the other.
Uneven parking brake action often traces back to the equalizer. A bar that is bent, seized at its pivot, or worn at the cable hole can hold one side tight while the other stays loose. Inspect the bar, the clevis pins and the cable ends whenever the parking brake feels weak or one wheel drags.
Cable adjustment and the equalizer should be checked together. After replacing the bar, set the cable tension so both rear wheels release fully when the lever is down, and confirm the lever travel stops at a consistent point.
- Check for free pivot movement
- Inspect cable ends for stretching
- Replace worn clevis pins
- Test release on both rear wheels
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | 16751.06 |
| UPC | 804314061623 |
| Part type | Parking brake equalizer bar |
| Brake size | 10-inch brakes |
| Side | Passenger or driver side |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering, and match the brake size and side to your setup.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
A parking brake equalizer bar for 10-inch brakes, offered for the passenger or driver side.









