Overview
The Omix-ADA 16919.24 is a steel preformed clutch master cylinder hose. It fits 4 cylinder Jeep CJ5 models from 1980 to 1983 and Scrambler models from 1981 to 1985. It does not work on a CJ7.
Key features
- Steel preformed clutch line
- Fits 4 cylinder engines
- Does not work on a CJ7
- Direct fit listing from Omix-ADA
Hose condition and routing
Steel clutch lines carry fluid under pressure from the master cylinder toward the slave side, and they stay put once bent to shape. Their main risks are corrosion at the ends, fatigue where the line is clamped, and abrasion from contact with the frame or suspension. A preformed line should be compared with the old one by routing before removal.
Look for seeping fittings, green or white corrosion crust, and dents that could restrict flow. Keep the line clear of exhaust heat and moving parts, and confirm clips are seated so the line cannot rub. Because a clutch hydraulic system is sealed, fitting a new line usually calls for checking the reservoir level and the master cylinder connections as well.
- Check fittings for seepage
- Look for corrosion at bends
- Keep the line clear of heat and rub points
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | 16919.24 |
| UPC | 804314036171 |
| Material | Steel |
| Form | Preformed line |
| Engine | 4 cylinder |
Vehicle fitment
It fits 1980–1983 CJ5 (Base, Golden Eagle, Laredo, Limited, Renegade) and 1981–1985 Scrambler (Base, Laredo, Renegade, SL, SR). It does not work on a CJ7.
The CJ7 appears on the list, but this hose is noted as not working on a CJ7. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because this is a hydraulic clutch line, bleed the clutch system and check every connection for leaks after fitting.
What’s included
The steel preformed clutch master cylinder hose only.
Not included: clutch fluid and other hydraulic parts.









