Overview
The Omix-ADA 16733.64 is a rubber replacement brake hose kit for the 1997 to 2006 Jeep Wrangler (TJ) with front disc and rear drum brakes. Omix-ADA’s short description names the 97-06 Wrangler TJ/LJ.
Brake hoses are exposed to extreme temperatures and the elements, and the rubber can crack over time, which can lead to hose failure. Omix-ADA builds this kit to the standards demanded by the factory as a replacement for worn hoses.
Key features
- Rubber replacement brake hoses
- For models with front disc and rear drum brakes
- Both front hoses and the rear hose
- Copper washers included
- Built to factory standards
- Direct fit
Replacing brake hoses safely
A brake hose kit replaces several flexible lines at once, which is useful when the rubber on the front and rear hoses is aging together. The hoses connect rigid brake lines to the calipers and axle, so each one must lie without twist and clear suspension travel. Route each hose carefully and make sure it is not rubbing on the frame, the tire or a spring.
Banjo fittings seal with washers, and washers are meant to be replaced each time a fitting is loosened. Tighten each banjo bolt carefully, since overtightening can crush a fitting, and bleed the system once the work is done. Keep the brake pedal firm and check every joint for seepage before taking the vehicle onto the road.
- Replace copper washers at each banjo fitting
- Confirm no hose is twisted at full suspension travel
- Bleed the system after replacing any hose
- Inspect all fittings for leaks before driving
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 16733.64 |
| UPC | 804314301118 |
| Product type | Brake hose kit |
| Hose material | Rubber |
| Position | Front and rear |
| Length | Stock |
| Brake setup | Front disc, rear drum |
| Included hardware | Copper washers |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1997 to 2006 Jeep Wrangler (TJ) and the 97-06 Wrangler TJ/LJ with front disc and rear drum brakes.
Wranglers with four-wheel disc or other brake setups are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The brake caliper banjo bolt is not part of this kit. Omix-ADA says to use part 16736.03 for the banjo bolt.
What’s included
Both front brake hoses, the rear brake hose and copper washers.
Not included: Brake caliper banjo bolt (Omix-ADA part 16736.03).









