Overview
The Omix-ADA 16749.01 is a front brake caliper bolt for single bolt calipers on the 1976–1981 Jeep CJ5 and CJ7 and the 1981 Jeep Scrambler. It is a direct OE replacement built to original specifications.
This bolt is made for the single bolt caliper style, so the caliper design matters more than the model year alone. The bolt holds the caliper to its mount at the front axle. The part carries a limited five year warranty, which suits a classic CJ restoration. Compare the old bolt with the new one before ordering, since the part number is tied to the caliper style as well as the model year. A bolt that does not match a single bolt or two bolt caliper will not seat correctly.
Key features
- Front brake caliper bolt
- Made for single bolt calipers
- Built to original specifications as a direct OE replacement
- Direct fit listing for CJ5, CJ7 and Scrambler
- Carries a limited five year warranty
Matching the caliper style
Single bolt and two bolt calipers look similar at a glance, so count the mounting bolts on your caliper before buying. Older CJ front brakes differ between years and caliper designs, and a bolt for one style can be too long, too short or threaded differently for the other. Using the correct style keeps the caliper square on the rotor and holds it firmly against the mount.
When the caliper is off, look at the bolt threads, the head, and the mounting bore for wear, rust or galling. Replace any bolt that is stretched, cracked or corroded. Clean the threads and follow the service procedure for any thread compound, which helps keep future removal easy. Check the pads and rotor at the same wheel while the caliper is off.
- Count the caliper bolts before ordering
- Inspect threads and bore for rust or galling
- Replace stretched or cracked bolts
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | 16749.01 |
| UPC | 804314072056 |
| Part type | Brake caliper bolt |
| Position | Front |
| Caliper design | Single bolt caliper |
| Fit type | Direct fit |
| Warranty (stated by Omix-ADA) | Limited five year warranty |
Vehicle fitment
It fits the 1976–1981 Jeep CJ5, the 1976–1981 Jeep CJ7 and the 1981 Jeep Scrambler, across the trim range including Base, Laredo, Renegade and Golden Eagle.
It does not fit later CJ and Scrambler years, Wrangler models, or calipers that use two bolts, which need a different part. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the bolt count on your front caliper before installing, since this part is for single bolt calipers. Follow the Jeep service procedure for the correct torque. Replacing a caliper bolt is also a good moment to inspect the pads, rotor and rubber hardware at that wheel.
What’s included
- One brake caliper bolt, part 16749.01. Confirm the quantity needed for your caliper before ordering.
Not included: the caliper, brake pads, rotor or other mounting hardware.












