Overview
The Jeep 6104257AA is a caliper adapter to knuckle mounting bolt for the front brakes of the 2010 Jeep Wrangler JK. It is a factory style replacement bolt in an M14 x 1.50 x 40.00 size and fits 2-door and 4-door models.
On the front axle, the caliper adapter bolts to the steering knuckle, and the brake caliper rides on the adapter. This bolt is the fastener for that joint, so it carries braking load. The M14 x 1.50 x 40.00 size gives thread diameter, thread pitch and length in standard metric format. It is a factory style replacement, which suits repairs that keep the original hardware layout. The adapter-to-knuckle bolt is separate from the guide pins that let the caliper slide, so a brake job that touches the adapter involves this bolt even when the caliper is untouched.
Key features
- Front caliper adapter to knuckle mounting bolt
- Factory style replacement part under the Jeep brand
- Metric size M14 x 1.50 x 40.00
- Fits 2-door and 4-door models
- Fitment list names the 2010 Wrangler JK
Checking the knuckle and adapter
Because this bolt carries braking load, the seating surfaces around it matter as much as the bolt itself. Rust or pitting on the knuckle face or the adapter can stop the bolt from clamping evenly, which may loosen the joint over time. Clean both faces to bare metal before the new bolt goes in.
Inspect the threads in the knuckle for damage as well. A cross-threaded or stripped hole cannot be fixed with a longer bolt, so the knuckle may need repair. Keep the joint clean and dry, and check the adapter position once the bolt is in to be sure it sits square.
- Clean the knuckle and adapter faces to bare metal
- Check threads in the knuckle for damage
- Confirm the adapter sits square before tightening
Specifications
| Brand | Jeep |
|---|---|
| Part number | 6104257AA |
| UPC | 70000547591 |
| Part type | Caliper adapter to knuckle mounting bolt |
| Position | Front |
| Size | M14 x 1.50 x 40.00 |
| Body styles | 2 and 4-door models |
| Part style | Factory style replacement part |
| Category | Disc brake caliper bolt |
Vehicle fitment
It fits the 2010 Jeep Wrangler (JK), including the Rubicon trim. Both the two-door Wrangler and the four-door Unlimited body style are covered.
The fit is for the 2010 Wrangler JK. Confirm your year, model and trim before ordering, especially for other JK model years, TJ or JL models.
Installation notes
Compare the full M14 x 1.50 x 40.00 size with the bolt you remove, since this fastener joins the front adapter to the knuckle. Use the Jeep service procedure for the tightening specification, and replace hardware that shows damaged threads. Replacing the bolt is also a chance to inspect the knuckle face and the adapter seating surface for rust or damage.
What’s included
- One caliper adapter to knuckle mounting bolt, part 6104257AA. Confirm the quantity needed for your repair before ordering.
Not included: the caliper adapter, caliper, steering knuckle or brake pads.









