Select your vehicle

Off-Road Light Bar Multi-Mount System

Nfab

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fits 2017–2018 Ford F-250 and F-350 Super Duty trucks
  • Multi-mount system for off-road lights from 3 to 9 in
  • Direct bolt-on installation with no drilling needed
  • Black powder coated; 5 year finish and lifetime workmanship warranty

Description

Overview

The Nfab Off-Road Light Bar Multi-Mount System (part F173LH-AC) is a black powder coated mounting system for off-road lights from 3 to 9 in. It fits 2017–2018 Ford F-250 and F-350 Super Duty trucks.

The system bolts on directly with no drilling and is built from 1.5 in tubing. It is designed for use with active cruise control, and it carries a 5 year finish warranty and a lifetime workmanship warranty.

Key features

  • Mounts lights from 3 to 9 in
  • Direct bolt-on installation, no drilling needed
  • 1.5 in tubing with .095 tubing wall
  • Black powder coated finish
  • Noted for use with active cruise control
  • 5 year finish warranty and lifetime workmanship warranty

Multi-mount use on Super Duty

A multi-mount bar on a Super Duty front end adds lights where the truck carries the most load, so mounting points should sit firmly on the bumper or grille structure. Check the bolt pattern and clearance to the radiator and bumper before adding lights, because heavier lights change the stress on the mount.

Light size and beam choice matter as much as the mount. Wider flood beams suit slow trail work, and narrow spot beams reach farther on open roads. Pick lights that match your setup, and keep the wiring on a fused relay so the switch can run them without loading the truck’s electrical system.

After rough trips, inspect the tubing welds, bolt torque and light housings for cracks or movement. Touching up scratches in the powder coat keeps the finish from chipping down to bare metal. Recheck the light aim after any remount, since a small shift changes the beam pattern.

Specifications

Brand Nfab
Part number F173LH-AC
UPC 843206110681
Light size range 3 to 9 in
Tubing 1.5 in, .095 tubing
Finish Black powder coated
Installation Direct bolt on, no drilling needed
Warranty 5 year finish; lifetime workmanship

Vehicle fitment

It fits the 2017–2018 Ford F-250 Super Duty and F-350 Super Duty in King Ranch, Lariat, Limited, Platinum, XL and XLT trims.

The list does not include the F-150 or any Super Duty model years before 2017. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

The system bolts on directly with no drilling. Check your light sizes against the 3 to 9 in range, and confirm that the active cruise control setup on your truck is the one Nfab notes.

What’s included

Check the package contents against your installation before starting.

Not included: lights, which are sized to fit the 3 to 9 in range.

SKU: N/FF173LH-AC Category:

Specification

Shipping weight 39.00 lbs
Package dimensions 79.00 × 23.00 × 13.00 in
brands

Fitment

VehicleYearsTrims
Ford F-250 Super Duty2017–2018King Ranch, Lariat, Limited, Platinum, XL, XLT
Ford F-350 Super Duty2017–2018King Ranch, Lariat, Limited, Platinum, XL, XLT

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

What size lights does the Nfab F173LH-AC hold?

The system holds lights from 3 to 9 in. Choose lights within that range, and measure each light before mounting it.

Does the Nfab multi-mount system need drilling?

No. Nfab describes direct bolt-on installation with no drilling needed, and the system is built from 1.5 in tubing with a black powder coated finish that Nfab says is backed by a 5 year warranty.

Will the Nfab system fit a 2019 Ford F-250?

Nfab's listed fitment covers only 2017 and 2018 F-250 and F-350 Super Duty models, so later model years are not on the list. Check your year and trim against the list before mounting.

What warranty comes with the Nfab light bar multi-mount system?

The finish carries a 5 year warranty, and the workmanship carries a lifetime warranty. Both coverage periods apply to the black powder coated finish and the mounting system.

Can I add a light bar to the Nfab system later?

Yes, if the new light stays within the 3 to 9 in range. Check its mounting width and weight against the system before fitting it. Recheck bolt torque and light aim once the new light is installed.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon