Select your vehicle

RBS Rear Bumper

Nfab

Shop Ford F-350 Super Duty Rear Bumpers on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fits the 2017–2018 Ford F-250 and F-350 Super Duty
  • Textured black, welded 1.75 in. tubing
  • Skid plate and license plate mount included

Description

Overview

The N-Fab F17RBS-H-TX is a textured black RBS rear bumper for the 2017–2018 Ford F-250 Super Duty and F-350 Super Duty. It includes a brushed aluminum skid plate and a license plate mount.

N-Fab builds the bumper from 1.75 in. tubing with a .095 wall, and the whole assembly is welded as one piece. Warranty coverage is 5 years on the finish and a lifetime on workmanship.

Key features

  • RBS rear bumper in textured black
  • Brushed aluminum skid plate
  • License plate mount
  • 1.75 in. tubing with .095 wall
  • Fully welded one-piece construction
  • 5 year finish warranty and lifetime workmanship warranty

Tubing and welded construction

Tubing wall thickness and weld quality decide how well a rear bumper handles impacts and repeated use. The bumper is built from 1.75 in. tubing with a .095 wall and welded as one piece, so there are fewer joints that can crack under load. Good weld quality matters more than size when the truck is driven hard.

Coatings matter too. A textured black finish hides small scrapes better than a glossy one, but bare steel exposed by a deep scratch should be touched up quickly. Keep an eye on the welds and on the tubing where it bends near the mounts, since those spots collect water and grit.

When cleaning, use mild soap and avoid high-pressure spray aimed straight at the seams. Recheck the mounting bolts after the first few drives, especially on a truck that tows or runs on rough roads.

Specifications

Brand N-Fab
Part number F17RBS-H-TX
UPC 843206110858
Product type RBS rear bumper
Tubing 1.75 in., .095 wall
Finish Textured black
Skid plate Brushed aluminum
License plate mount Yes
Position Rear
Fit type Direct fit
Warranty 5 year finish; lifetime workmanship

Vehicle fitment

It fits the 2017–2018 Ford F-250 Super Duty and the 2017–2018 Ford F-350 Super Duty.

The fit is limited to the 2017–2018 Super Duty years. Match your truck’s year, model and trim before you order.

What’s included

One RBS rear bumper with a brushed aluminum skid plate and a license plate mount.

SKU: N/FF17RBS-H-TX Category:

Specification

Shipping weight 75.00 lbs
Package dimensions 80.00 × 31.00 × 28.00 in
brands

Fitment

VehicleYearsTrims
Ford F-250 Super Duty2017–2018King Ranch, Lariat, Limited, Platinum, XL, XLT
Ford F-350 Super Duty2017–2018King Ranch, Lariat, Limited, Platinum, XL, XLT

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the N-Fab F17RBS-H-TX fit a 2017 F-250?

Yes. It fits the 2017–2018 Ford F-250 Super Duty and F-350 Super Duty, so a 2017 F-250 is covered. Still check the trim against your truck before ordering.

What tubing does the F17RBS-H-TX use?

The bumper uses 1.75 in. tubing with a .095 wall, welded into a single piece by N-Fab, with a brushed aluminum skid plate on the rear.

Is there a license plate mount on the F17RBS-H-TX?

Yes. The bumper has a license plate mount, and it also includes the brushed aluminum skid plate, finished in textured black by N-Fab.

How can I tell if a rear bumper needs repair?

Look for cracks along the welds, bent tubing, loose mounting points and rust spreading from scratches. Any crack in a welded seam should be looked at before the truck is used for towing or hard trail driving. Small paint chips can be sanded and touched up before rust starts.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Ford F-350 Super Duty Rear Bumpers on Amazon