Overview
The Nfab F1730LD-TX is a Multi-Mount LED light bar mount system in textured black for the 2017 Ford F-250 and F-350 Super Duty. It is a bolt-on front mount that holds an LED light bar without drilling, and it is designed to work with LED light bars from all manufacturers. Light bars are sold separately.
Nfab is based in Houston, Texas, where it fabricates tubular bumpers, tire carriers, nerf bars and other accessories for trucks, Jeeps and SUVs. Its builds are welded and one piece, and the company applies a zinc coating followed by a powder-coated finish. This F1730LD-TX comes in textured black and uses .095 wall tubing.
Key features
- Bolt-on mounting with no drilling required
- Welded, one-piece construction
- Textured black finish
- Designed to work with LED light bars from all manufacturers
- Does not work on models with the Adaptive Cruise Control box
- Life Time Warranty on the product and 5 Year Warranty on the finish
- Made in the USA
Choosing a light bar
Front-mounted light bars take a lot of wind, road debris and vibration, so the mounting points carry real load. Before installing, look at how the bar sits relative to the grille and hood, and make sure the bar’s own bracket hardware matches the mount. Wider or heavier bars put more stress on the tubing, so pick a bar with a secure, rated mounting system. Aim the bar with its beam height in mind, since a bar set too high can dazzle oncoming drivers.
Wiring deserves attention too. A fused relay protects the battery circuit and lets the bar switch on with the ignition or a dash switch. Route the harness away from pinch points around the hood latch and engine bay. After the first few trail runs, re-check every fastener and inspect the welds for hairline cracks.
Specifications
| Brand | Nfab |
|---|---|
| Part number | F1730LD-TX |
| UPC | 843206110629 |
| Finish | Textured black |
| Tubing | .095 wall tubing |
| Construction | Welded, one piece |
| Mounting | Bolt-on, no drilling required |
| Location | Front |
| Fit type | Direct fit |
| Lights | Sold separately |
| Warranty | Life Time Warranty on product; 5 Year Warranty on finish |
| Made in | USA |
Vehicle fitment
It is a direct fit for the 2017–2018 Ford F-250 Super Duty and F-350 Super Duty in King Ranch, Lariat, Limited, Platinum, XL and XLT trims. The F-450 and F-550 are not covered, so confirm fit for your vehicle’s year, model and trim before ordering.
Models with the Adaptive Cruise Control box are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Mounting is bolt-on with no drilling, so the main pre-installation check is whether the truck has the Adaptive Cruise Control box, since the mount does not work with it. Wire any light bar you add through a fuse, and check local rules on road-use lighting before mounting a bar on the front of the truck.
What’s included
Check the package contents against your installation before starting.
Not included: LED light bars are sold separately.












