Overview
The Rubicon Express RXJ2002 is a single Neutral Force Steering Stabilizer for the Jeep Wrangler JK. It is designed to reduce steering vibration and wear on steering components, and it mounts at the front as a single, direct-fit unit. The part number is RXJ2002.
A traditional stabilizer can create a non-linear steering response or push to one side, because the shock tries to extend as gas pressure builds. This stabilizer has an internal negative spring that offsets that force, so the response stays closer to neutral. It fits 2007-2018 Wrangler JK models in the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims, including the Unlimited versions.
Key features
- Negative spring offsets the force from increased gas pressure, which helps return to center
- Internal metering rod with 13 stages of adjustability
- Less exposed shaft to reduce damage from rocks and road debris
- Compact and lighter design, per the manufacturer
- Clear coat zinc body finish
- Teflon lined spherical rod ends
- Two piece tie rod mount with billet cover
- Nitrocarb rod
- Piggyback reservoir for more fluid capacity and to maintain neutral force
- Machined 6061 aluminum ends
Setup and centering
A neutral force stabilizer works by balancing the pressure inside the cylinder so the steering returns to center without pushing to one side. Setup is the main variable. The internal metering rod adjusts how the stabilizer responds, so it is worth taking time to set it for the tires and terrain you run.
When the stabilizer is replaced, check the parts it connects to. Tie rod ends, drag link ends and the steering box mounts should be inspected for play, since looseness can feel the same as a worn stabilizer. The tie rod mount and billet cover should be checked for wear and fastener torque after installation, along with steering centering and clearance at full lock.
- Inspect tie rod ends before replacing the stabilizer
- Check the reservoir and cylinder for leaks
- Confirm the rod ends move freely
- Recheck clamp bolts after the first trail runs
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RXJ2002 |
| UPC | 614901232967 |
| Type | Single steering stabilizer, neutral force |
| Position | Front |
| Adjustability | 13 stages |
| Rod | Nitrocarb |
| Ends | Machined 6061 aluminum, Teflon lined spherical rod ends |
| Reservoir | Piggyback |
| Shock boot | Not included |
| Brackets | Not included |
Vehicle fitment
It fits the 2007-2018 Jeep Wrangler JK in the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims, and in the Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S and Unlimited X trims.
It does not fit the JL or later Wrangler models. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The stabilizer’s negative spring and the metering rod are set up for the JK steering geometry, so the stabilizer should be installed with the tie rod mount and brackets that suit the vehicle. Because the brackets are not included, the mounting parts need to be sourced separately. Check the steering centering and the stabilizer clearance at full lock after the install.
What’s included
The package is the single steering stabilizer with its piggyback reservoir, the two piece tie rod mount and billet cover. Not included: the shock boot and the brackets.











