Overview
The N-Fab Wheel To Wheel Nerf Steps in Textured Black, part number N/FT0786CC-TX, are nerf bars with a patented hoop step design for the 2007–2018 Toyota Tundra in 1794 Edition, Base, Limited, Platinum, SR5 and TRD Pro trims. The bars run the full length between the wheels and cover the cab entry area.
The hoop has a 3 inch main tube diameter and is built from .084 wall steel tubing. The drop-down step is placed for access on stock or lifted trucks, and the bar sits high and tight to the body for a clean, modern look and protection from road debris. The construction is fully welded in one piece, which N-Fab says supports strength and long lasting durability.
Key features
- Patented N-FAB hoop step design with a drop-down step
- 3 inch main tube diameter
- .084 wall steel tubing
- Fully welded, 1-piece construction
- High and tight mounting position close to the body
- The drop-down step is positioned for easy reach on stock or lifted vehicles.
- Textured/Matte Black finish
Before you buy
A hoop step bar mounts high and tight to the body, so the mounting location matters more than on a standard side step. Measure the space between the body and the bar before fitting, and confirm that the drop-down step does not interfere with door swing or the running boards.
The main tube takes the impacts from rocks and brush, so check the welds and the tube surface after each trail outing. Because the bar sits close to the body, paint rubbing at the rocker often signals that it has shifted and needs adjustment.
- Check door swing against the drop-down step
- Look for dents in the 3 inch tube after rough trails
- Tighten mounting hardware after the first few drives
Specifications
| Brand | N-Fab |
|---|---|
| Part number | N/FT0786CC-TX |
| Finish | Textured/Matte Black |
| Length | Wheel to wheel |
| Main tube diameter | 3 inch |
| Material | Steel tubing, .084 wall |
| Construction | Fully welded, 1-piece |
| Design | Patented hoop step with drop-down step |
| Fitment type | Direct Fit |
Vehicle fitment
It fits the 2007–2018 Toyota Tundra in 1794 Edition, Base, Limited, Platinum, SR5 and TRD Pro trims.
The list does not cover the 2004–2006 Tundra or the Tacoma. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the mounting requirements for your Tundra before starting the install, including whether the bar bolts on or needs drilling. The fully welded build is designed for strength and long-lasting use.
What’s included
The kit is one set of nerf steps with a patented hoop design.
Not included: no bolts or brackets are named for this kit.











