Select your vehicle

N-Fab Wheel To Wheel Nerf Steps (Black) – D10110MC-6

N-Fab

$490.50In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 17, 2026 10:30 AM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Direct fit wheel to wheel nerf steps for the 2010 Ram 2500 and 3500 and 2011–2019 Ram 2500 and 3500
  • Heavier gauge .084 wall steel, all-welded in one piece
  • Gloss black with zinc coat and thick high gloss powder coat
  • Part number N/FD10110MC-6

Description

Overview

Part number N/FD10110MC-6 is a gloss black wheel to wheel nerf step for heavy-duty Dodge Ram pickups. It fits the 2010 Ram 2500 and 3500 and the 2011–2019 Ram 2500 and 3500, and it mounts along the lower body to help occupants climb into the cab.

Each bar is built from .084 wall steel in one welded piece. A zinc coat goes on the steel before a thick layer of high gloss powder coating in gloss black. The kit runs from wheel to wheel.

Key features

  • Wheel to wheel length
  • Heavier gauge .084 wall steel tubing
  • All-welded one-piece construction
  • Zinc coat under the finish for corrosion protection
  • Thick high gloss powder coat in gloss black
  • Direct fit for the 2010 and 2011–2019 Ram 2500 and 3500 pickups.

Choosing the right setup

Wheel to wheel nerf steps run the full length of the lower body, so they suit a crew cab that people use often. Because the bar is one welded piece, the whole run moves together when it is bumped, which keeps the mounts evenly loaded. Think about where you park, since a long bar can catch on curbs and tight garage edges.

The zinc coat under the powder coat is what slows rust at cut edges and weld seams. If the powder coat is chipped, clean the area, apply a rust-inhibiting primer, and paint over it. Check the mounting bolts after rough use, and keep a spare set of fasteners handy for trail repairs.

  • Clean the bar with mild soap and water every few weeks
  • Look for paint bubbling along the lower edge

Specifications

Brand N-Fab
Part number N/FD10110MC-6
Finish Gloss Black, high gloss powder coat
Length Wheel to wheel
Tube wall .084 wall steel
Construction All-welded, one piece
Corrosion protection Zinc coated
Fitment type Direct fit

Vehicle fitment

The manufacturer fitment list names the 2010 Dodge Ram 2500 with Laramie, SLT, SXT and TRX trims, the 2010 Ram 3500 with Laramie and SLT trims, and the 2011–2019 Ram 2500 and Ram 3500 with trims including Big Horn, Laramie Longhorn, Lone Star, Power Wagon and Tradesman.

Ram 1500 trucks do not fit this kit, and Ram 2500 or 3500 years outside 2010 through 2019 are not covered. Confirm fit for your vehicle’s year, model and trim before ordering.

What’s included

Confirm the packed parts match your installation before you begin.

SKU: N/FD10110MC-6 Categories: , ,

Fitment

VehicleYearsTrims
Dodge Ram 25002010Laramie, SLT, SXT, TRX
Dodge Ram 35002010Laramie, SLT
Ram 25002011–2019Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, Outdoorsman, Power Wagon, SLT, Tradesman
Ram 35002011–2019Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, SLT, Tradesman

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the N/FD10110MC-6 fit a 2011 Ram 2500?

Yes, if your truck is a 2011–2019 Ram 2500 with one of the named trims, such as Big Horn, Laramie, Power Wagon, SLT or Tradesman. Confirm your vehicle's year, model and trim before ordering.

Is this nerf step welded as one piece?

Yes. The bar is all-welded in one piece from .084 wall steel. Each part is zinc coated, then finished in gloss black with a thick high gloss powder coat.

Does this fit Ram 1500 trucks?

No. This kit covers Ram 2500 and Ram 3500 models only, so Ram 1500 trucks are not covered. Check year, model and trim against your vehicle before you order.

How should I maintain the powder coat?

Wash the bars with mild soap and water every few weeks, rinsing away road salt and mud. Touch up small chips quickly so moisture does not reach the steel underneath.

Do wheel to wheel bars change approach angle?

They can, because the lowest point of the bar sits along the rocker. Check the bar height against the terrain you drive and avoid sharp rocks that could strike the tubes.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon