Overview
The N-Fab Predator Pro Step System, textured black, part number N/FPRD1077CC-TX, is a drop-down hoop step kit for the 2010 Dodge Ram 2500 and 3500 and the 2011–2019 Ram 2500 and 3500 trucks listed below. Each step uses a patented drop-down hoop with a large dimpled step pad.
The fully welded, one-piece hoop gives the body a clean line along the truck. The large dimpled step pad provides footing for entry in any condition.
Key features
- Patented drop-down hoop step
- Large dimpled step pad
- Fully welded one-piece design
- Textured black finish
- Cab length steps
- Two steps supplied with installation hardware
- Direct fit to the listed 2010 and 2011–2019 Ram 2500 and 3500 trucks
Before you buy
A drop-down hoop step adds a stepping point between the ground and the cab door, which matters most on a lifted truck with a high ride height. Look at how far the pad sits below the door sill and whether your boots can reach it without a reach or a hop. The hoop shape also affects how easily you can grab the frame when climbing in with gear.
Because the hoop is welded to the mounting points, the bracket area carries the load of every entry. Check the welds and fasteners after the first few weeks of use, and look for hairline cracks around the hoop ends or loose bolts at the frame. Road salt and mud collect in the tube bends, so rinse them and touch up any chipped finish before rust starts.
- Confirm clearance for the rear wheel arch and any side-mounted tools before drilling
- Keep a spare set of fasteners on hand for future trail repairs
Specifications
| Brand | N-Fab |
|---|---|
| Part number | N/FPRD1077CC-TX |
| Product | Predator Pro Step System (Textured Black) |
| Finish | Textured/Matte Black |
| Length | Cab Length |
| Construction | Fully welded, one-piece |
| Steps included | Two |
| Fitment type | Direct fit |
| Drilling | Some trucks need minor drilling |
Installation notes
Installation can be carried out in a home garage, N-Fab says, without special tools. Some trucks need minor drilling, and each kit includes instructions written for the specific vehicle, so follow those before starting.
Vehicle fitment
The kit fits the 2010 Dodge Ram 2500 (Laramie, Power Wagon, SLT, ST, SXT, TRX), the 2010 Dodge Ram 3500 (Laramie, SLT, ST), the 2011–2019 Ram 2500 (Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, Outdoorsman, Power Wagon, SLT, ST, Tradesman) and the 2011–2019 Ram 3500 (Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, SLT, ST, Tradesman).
Ram 2500 and 3500 model years outside the listed range, and all other Ram models, are not part of this list. Only the trims named above are covered. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Hardware for installation and two steps come in the box.
















