Overview
The N-Fab Wheel to Wheel Nerf Steps in Gloss Black, part number N/FD10103CC-6, are steel nerf steps for the Dodge Ram 1500, 2500 and 3500 trucks. Nerf steps, also called nerf bars, run along the lower side of the truck to give a step up into the cab. This kit runs wheel to wheel, spanning the full distance between the front and rear wheels on each side.
Each bar is built from heavier .084 wall steel tubing as one all-welded piece. The steel is zinc coated for corrosion protection, then covered with a thick, high gloss powder coat in gloss black. The kit is a direct fit design for the trucks it covers.
Key features
- Wheel to wheel length spanning the full side of the truck
- Heavier gauge .084 wall steel tubing
- All-welded one-piece construction
- Zinc coated for corrosion protection
- Thick high gloss powder coat finish in gloss black
- Built to fit the Ram trucks it covers as a direct fit.
Before you install
Nerf steps take regular contact from boots and hands, so the finish near the step surface is the first place wear shows. Look over the bars before installation for chips or scratches in the powder coat, and touch up exposed steel quickly so the zinc layer underneath keeps working. Clean the bars with mild soap and water rather than harsh solvents, since strong cleaners can dull a gloss finish over time.
Mounting points carry the load of people climbing in and the weight of the bar itself, so check the bolts after the first few drives and again at each oil change. Look for shifting, rattling or gaps between the bar and the body. Wheel to wheel bars also sit close to the wheels and suspension, so confirm there is clearance when the truck is turned and driven over uneven ground.
Specifications
| Brand | N-Fab |
|---|---|
| Part number | N/FD10103CC-6 |
| Finish | Gloss Black, high gloss powder coat |
| Length | Wheel to wheel |
| Tube wall | .084 wall steel |
| Construction | All-welded, one piece |
| Corrosion protection | Zinc coated |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list covers the 2010 Dodge Ram 2500 and 3500, the 2014–2016 Ram 1500, and the 2011–2016 and 2019 Ram 2500 and 3500. Named trims include Laramie, SLT, ST, SXT, Big Horn, Lone Star, Outdoorsman, Power Wagon and Tradesman, depending on the model year group.
Ram 1500 model years outside 2014–2016 are not on this list, and Ram 2500 or 3500 years not named above are not covered. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Check the package contents against your installation before you begin.









