Overview
The Mountain Off Road Enterprises 98200 is a universal shock mount, a formed bracket designed for an axle housing. It is made from 3/16 in. bare steel and has a 1/2 in. hole for the shock. It is sold each.
The bracket mounts the shock with the bolt parallel to the housing tube. The inside dimension of the ears is 1-1/2 in.
Key features
- Formed from 3/16 in. steel
- 1/2 in. shock bolt hole
- Bolt sits parallel to the housing tube
- Bare steel with no finish applied
- Universal application
Axle bracket fitment basics
A housing-mounted shock bracket takes the shock’s compression load into the axle tube, so the bracket’s position and weld quality matter as much as its steel. Bracket spacing should give the shock a clear arc, with the bolt parallel to the tube so the eye does not bind under load.
Measure the housing diameter at the mounting spot, since a bracket with fixed ear spacing can sit off-square on a larger or smaller tube. Confirm the 1-1/2 in. inside ear clearance suits the shock’s eye width before welding. Test the fit with the shock hung before final welds.
Bare steel rusts quickly at weld spots, so clean and paint the bracket after installation. Check the welds and bolt holes after rough trail use, since cracks at the ears are a sign the bracket is working harder than intended.
- Measure the housing diameter at the mounting spot
- Test-fit the shock before final welding
- Paint bare steel after welding
Specifications
| Brand | Mountain Off Road Enterprises |
|---|---|
| Part number | 98200 |
| UPC | 815572020253 |
| Material | 3/16 in. steel |
| Finish | Bare steel |
| Bolt hole | 1/2 in. |
| Inside ear dimension | 1-1/2 in. |
| Quantity | Sold each |
Vehicle fitment
It is a universal application bracket for axle housings, so fit depends on the housing diameter and shock size. Confirm the housing diameter and shock size match your setup before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm whether the bracket requires welding before fitting it to the housing. Position the bolt parallel to the tube.
What’s included
One shock mount bracket, sold each.
Not included: Shock absorbers and mounting hardware are not included, so source them separately.








