Overview
The Morimoto XB Tail Harness Adapter, model LF434, is a wiring harness that connects Morimoto XB LED tail lights to the factory connectors on 2018 and newer Ford F-150 trucks. It takes OE Ford connectors on its input side and outputs to the Morimoto XB LED tail lights.
Morimoto’s XB LED tail lights are designed as a direct replacement for the stock F-150 tail lights and use the stock mounting points. The adapter is the optional harness the XB tails need on 2018 and newer trucks. It is not compatible with trucks equipped with OEM LED or OEM BLIS tail lights.
Key features
- Takes OE Ford connectors on the input side and feeds Morimoto XB LED tail light connectors on the output side.
- Required for 2018 and newer F-150 trucks when installing the XB LED tail lights.
- 2015–2017 trucks do not need this harness for the XB tails.
- Made for the Morimoto XB Tail Lights, PartNO LF430.
- Not compatible with trucks equipped with OEM LED or OEM BLIS tail lights.
Tail light wiring basics
Aftermarket tail lights often rely on a harness to match the factory connector and bulb-out signals. Plugging the wrong harness into the wrong truck can cause flicker or warning messages, so match the harness to the tail light model before pulling the old lights. Keep the old harness and connectors until the new setup is working.
Tail light swaps go best with the truck parked on level ground and the battery disconnected. Check that the lights seat fully in the body opening and that the gasket is clean and undamaged, which keeps water out of the housing. After the first drive in rain or a car wash, look for moisture inside the lens.
- Test all functions before reassembly
- Keep wiring clear of exhaust heat
- Re-check connections after a few weeks
Specifications
| Brand | Morimoto |
|---|---|
| Model | LF434 |
| Compatible tail lights | Morimoto XB Tail Lights (LF430) |
| Input connector | OE Ford connectors |
| Output connector | Morimoto XB LED tail lights |
| Required for | 2018 and newer Ford F-150 trucks |
| Installation time | The tail swap takes around 30 minutes. |
Vehicle fitment
The fitment Morimoto lists is the 2018–2026 Ford F-150 in the King Ranch, Lariat, Limited, Platinum, Police Responder, Raptor, SSV, Tremor, XL and XLT trims.
The 2015–2017 F-150 falls outside the fitment range, and trucks with BLIS or OEM LED tail lights are not compatible. Match your year, model and trim to this list before buying.
Installation notes
The adapter takes OE Ford connectors on its input side and feeds the XB LED tail lights on its output side. The tail swap uses the stock mounting points and takes around 30 minutes. Disconnect power to the tail light circuit before working on its wiring.
What’s included
This item is the harness that connects OE Ford connectors to the Morimoto XB LED tail lights.
Not included: The Morimoto XB LED tail lights (LF430) are required to complete the setup and are separate parts.
























