Overview
The Morimoto XB LED Headlights, part MRILF532.2-ASM, are sold as a pair and fit the 2014–2020 Toyota Tundra. The optics are quad-projector, built from triple kuria-optic projectors. The fitment covers the 1794 Edition, Limited, Platinum, SR, SR5 and TRD Pro trims.
These headlights are an upgrade over halogen, with a well defined beam pattern and good width, intensity and distribution of light. Integrated vertical and lateral adjusters let you aim them, and they are an improvement over many aftermarket options that reduce night visibility.
The styling uses piano black trim and smoked gray reflectors, which keeps the look neutral and close to original equipment. The set includes an Osram 5000K LED daytime running light and an amber LED turn signal optic that can run as a sequential signal or as solid on/off signals.
Key features
- Quad-projector optics with triple kuria-optic projectors
- Osram 5000K LED daytime running light
- Dedicated turn signal optic with amber LEDs, sequential or solid on/off
- Piano black trim and smoked gray reflectors
- UV-coated polycarbonate lens and PPS plastic housing
- Die-cast aluminum heat sinks inside the housing
- Vertical and lateral adjusters for aiming
Quad-projector care and aim
Quad-projector headlights rely on clear lenses and sealed housings to keep the beam pattern consistent. Clean the lens with mild soap and water, and avoid abrasive pads that can scratch the UV coating. Check the rubber seals and pigtail connections at each oil change or tire rotation, because moisture in the connectors can cause flicker or dim output.
Aim matters with multiple projectors, since small shifts can change how the pattern lands on the road. Use the vertical and lateral adjusters on level ground, with the truck at a normal load. Re-check aim after suspension changes, a new set of tires, or a bed load that tilts the truck. Note the setting that works best so later checks are quick.
- Lens washed with mild soap and water
- Seals and connectors inspected regularly
- Aim checked on level ground at normal load
- Aim re-checked after suspension or tire work
Specifications
| Brand | Morimoto |
|---|---|
| Part number | MRILF532.2-ASM |
| Model series | XB |
| Sold as | Pair |
| Optics | Quad projector, triple kuria-optic projectors |
| Daytime running light | Osram 5000K LED |
| Turn signal | Amber LED optic, sequential or on/off |
| Trim | Piano black |
| Reflectors | Smoked gray |
| Lens | UV-coated polycarbonate |
| Housing | PPS plastic |
| Heat sinks | Die-cast aluminum |
| Fitment | Direct fit |
Vehicle fitment
The manufacturer fitment list covers the 2014–2020 Toyota Tundra in 1794 Edition, Limited, Platinum, SR, SR5 and TRD Pro trims.
Other Toyota models are not covered. Check whether your truck came with factory LED headlights before ordering, and confirm your vehicle’s year, model and trim.
Installation notes
The lights plug into the factory connectors without modifications. Set the aim with the vertical and lateral adjusters after installation. Removal is simple, and the factory warranty stays intact.
What’s included
A pair of headlight assemblies comes with connectors, rubber seals and pigtails for a plug and play install.
Not included: Bulbs, adapters and accessories are not part of the package.





















