Overview
The Morimoto XB LED tail lights, part number MRILF430, are red-lens LED tail light assemblies sold as a pair for the 2015–2020 Ford F-150. Morimoto says they swap directly in place of the original tail lights on 2015–2018 non-BLIS F-150s, and that 2018 and later trucks need an optional harness.
The XB tails suit owners who have added more power, new wheels and larger tires, and the lens geometry follows the body lines. The lenses are polycarbonate and the housings are injection molded ABS.
Key features
- Complete tail light assemblies that use the stock mounting points
- Plug-and-play design, with connectors, rubber seals and pigtails included in each assembly
- Polycarbonate lens and injection molded ABS housing
- Available with a smoked or red lens, and both illuminate red
Checking the tail light setup
LED tail lights draw less current than incandescent units, but they still rely on the vehicle’s wiring and a solid ground. Before installing, look at the existing harness for heat damage, brittle insulation or previous repairs. Clean the ground point and check that connectors seat fully, since a loose connection can cause flicker on LED lamps.
Red lenses are commonly used for brake and tail functions, and the color should match the lamp position on the truck. Inspect the lens and housing for cracks after installation, and check that the lamp does not sit against the tailgate or bed rail where it can rub. Keep wiring clear of moving parts.
- Inspect the harness for heat damage
- Clean the ground point before fitting
- Check connectors for full seating
- Confirm the lamp clears the tailgate or bed
Specifications
| Brand | Morimoto |
|---|---|
| Part number | MRILF430 |
| Tail light series | XB |
| Lens color | Red |
| Sold as | Pair |
| Lens material | Polycarbonate |
| Housing material | Injection molded ABS |
| Installation time | Installation takes about 30 minutes using the stock mounting points. |
| Fitment type | Direct fit |
Vehicle fitment
Morimoto lists these tail lights for the 2015–2020 Ford F-150 in the King Ranch, Lariat, Limited, Platinum, Police Responder, Raptor, SSV, XL and XLT trims. Morimoto’s notes separate the trucks: 2015–2018 non-BLIS F-150s swap directly, 2015 to 2017 trucks plug in without special wiring, and 2018 and later trucks require the optional harness.
The XB tails are not compatible with trucks that have OEM LED or OEM BLIS tail lights, even with the optional harness. They fit 2015–2020 Ford F-150 models in the listed trims only, and earlier model years or other Ford models are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Morimoto estimates about 30 minutes for installation using the stock mounting points. Each assembly includes the connectors, rubber seals and pigtails for a plug-and-play install, and Morimoto says no additional resistors or modules are needed on 2015 to 2017 trucks. Check the harness requirement for your model year before starting. Disconnect the battery before working on tail light wiring.
What’s included
Each assembly includes connectors, rubber seals and pigtails. The optional harness is sold separately.
Not included: the optional harness required for 2018 and later F-150s.























