Overview
The Morimoto XB Hybrid LED Headlights, part number MRILF554, are a sold-as-pair set of Hybrid XB headlights for the 2017–2019 Ford F-250 and F-350 Super Duty. The design is inspired by the 17-19 F250 OEM LED headlights, and the Hybrid version has fewer projectors than the full XB while keeping many of its features.
Each headlight has a dedicated LED low beam projector and a separate LED high beam projector, with optics developed for this lineup. The LED daytime running light shares its optics with the higher-end XB and sits behind a smoked lens. Hybrid means the headlights combine LED and incandescent lighting: the turn signal uses a halogen bulb in the center of the housing, and an amber LED side marker is included. The OEM-grade housing is built to resist fading and yellowing.
The LED projector optics meet and exceed SAE, DOT and FMVSS108 regulations when aimed properly. A simple vertical adjuster on the back of each headlight is used for aiming.
Key features
- LED low beam projector and a dedicated LED high beam projector.
- LED daytime running light with a smoked diffuser, using optics shared with the higher-end XB.
- Amber LED side marker.
- Halogen turn signal bulb in the center of the housing.
- OEM-grade housing that Morimoto says will not fade or yellow over time.
- Vertical aim adjuster on the back of each headlight.
- Three plug-and-play connectors that join the factory wiring for low and high beam, turn signal bulb and DRL.
Maintenance and aim checks
Hybrid headlights combine LED modules with a halogen turn signal bulb, so the two parts age at different rates. Replace the halogen bulb when the turn signal dims or flickers, and check the LED modules if one section of the light stops working. Keep the housing clean and inspect the seal around the rear of the assembly after washing, since water inside the housing reduces light output.
Super Duty trucks carry heavy loads and are often towed, which can tilt the beam upward. Check aim after adding a bed load, a trailer or a suspension change, and adjust each headlight with its vertical adjuster on level ground. Consistent aim across the pair keeps the beam pattern even and reduces glare for oncoming drivers.
- Halogen turn signal bulb replaced when it dims
- Lens cleaned with mild soap and water
- Rear seal inspected after washing
- Aim checked after loads or suspension changes
Specifications
| Brand | Morimoto |
|---|---|
| Part number | MRILF554 |
| Model series | XB Hybrid |
| Sold as | Pair |
| Fitment | Direct fit |
| Light sources | LED low beam, LED high beam, LED DRL, amber LED side marker, halogen turn signal bulb |
| Housing | OEM-grade |
| Standards | SAE, DOT and FMVSS108 when aimed properly. |
Vehicle fitment
Morimoto lists these headlights for the 2017–2019 Ford F-250 Super Duty and F-350 Super Duty, in the King Ranch, Lariat, Limited, Platinum, XL and XLT trims.
Other Super Duty model years and other Ford trucks are not covered by this list. Check your year, model and trim against the list above first.
Installation notes
Three plug-in connectors join the headlights to the factory wiring for the low and high beam, the turn signal bulb and the DRL, so no wiring changes are needed. Aim each headlight with its vertical adjuster after installation, since the optics meet the standards only when aimed properly. Confirm local road-use rules for lighting before using these on public roads.
What’s included
Sold as a pair, with the halogen turn signal bulb and amber LED side marker part of the housing. Verify the package contents against your installation before starting.























