Overview
The Method Race Wheels 401 UTV Beadlock in 15×7 with a 4 on 156 bolt pattern and a titanium finish, part number MRWMR40157046843B, is an aluminum beadlock wheel from Method’s 401 UTV Beadlock series for side-by-sides and other UTVs.
The 401 UTV Beadlock is made for serious racers and enthusiasts. This wheel is 15 inches in diameter and 7 inches wide, with an offset of 13, a backspacing of 4.5 and a center bore of 132. Those figures set where the wheel sits in the wheel well and how much room it leaves for brakes and suspension, so compare them with your current wheels before ordering.
A beadlock wheel holds the tire bead against the rim with a separate ring that is bolted on, which keeps the tire seated when it is run at low pressure. On this wheel the ring is forged 6061 aluminum and is fastened with Grade 8 zinc-plated hardware.
Key features
- Forged 6061 aluminum beadlock ring
- Grade 8 zinc-plated mounting hardware
- Titanium finish on an aluminum wheel
- 15 by 7 inch size with a 4 on 156 bolt pattern
- Offset of 13 and backspacing of 4.5
- Load rating of 1600 lbs
Keeping the ring secure
A beadlock ring does its job only when it stays clamped to the tire bead. Its hardware carries the load every time the tire flexes over rock or drops into a rut, so it needs steady attention. Tighten the fasteners evenly around the ring, working in a pattern rather than going around one bolt at a time.
Set a simple habit for checks. After the first few runs, inspect the ring for gaps, look for loose or backed-out fasteners, and check the bead seat for scuffs or pitting. Mud and sand can hide small problems, so clean the wheel before inspecting. Keep spare hardware and a tire repair kit in the vehicle, since a loose ring is easier to fix in camp than on the trail.
- Check ring alignment after rough runs
- Look for gaps between ring and wheel
- Inspect fasteners for thread damage
- Carry spare hardware and a pump
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR40157046843B |
| Series | MR401 UTV Beadlock |
| Style | Beadlock |
| Wheel type | UTV |
| Diameter | 15 inches |
| Width | 7 inches |
| Bolt pattern | 4 on 156 |
| Offset | 13 |
| Backspacing | 4.5 |
| Center bore | 132 |
| Finish | Titanium |
| Construction | Aluminum |
| Beadlock ring | Forged 6061 aluminum |
| Hardware | Grade 8, zinc plated |
| Load rating | 1600 lbs |
| Fitment | Universal fit |
Vehicle fitment
It is a universal fit wheel, so it is not made for one UTV model. Whether it works on your machine depends on the 4 on 156 bolt pattern, the 13 offset, the 4.5 backspacing and the clearance between the wheel and your brakes, suspension and body.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The beadlock ring and its Grade 8 hardware hold the tire bead, so check that the ring sits flat and the hardware is tight before the wheel goes back on the vehicle.
What’s included
The wheel includes the forged 6061 beadlock ring and Grade 8 zinc-plated mounting hardware.
Not included: Tires.









