Overview
The Method Race Wheels 410 UTV Bead Grip is a 15×7 gold UTV wheel with a 4 on 136 bolt pattern and a 4+3 backspace. Method built it with Bead Grip technology, which engages the tire bead to add grip at low air pressures.
The wheel is non-beadlock and has an aggressive safety hump on the bead seats to help prevent de-beading under hard use. The body is one-piece 356 aluminum with T6 heat treatment. Method says each wheel was checked with finite element analysis and field testing, and that the line was developed for off-road racing.
The 15×7 size gives this wheel a 15 diameter and a 7 width, and the tire you mount has to be built for that rim. The 4 on 136 bolt pattern means four lug holes spaced on a 136 bolt circle, so the wheel only mounts to a hub with the same pattern. The 4+3 backspace measures from the mounting face to the inner edge of the wheel, which decides how far the tire sits inside the fender and how close it comes to suspension and brake parts. Compare all three figures against your UTV before mounting a tire, because the numbers on the wheel are the sizing details Method gives.
Key features
- Bead Grip design for extra tire bead grip
- Aggressive safety hump on the bead seats
- One-piece 356 aluminum construction
- T6 heat treatment
- Non-beadlock design
- Gold finish
Mounting on a non-beadlock wheel
A non-beadlock wheel relies on the tire bead seating against the bead seat and the air pressure to stay in place. Seat the bead fully before inflating, use a bead seating tool if needed, and keep the inflation within the range suited to your tires and load.
Low-pressure running on a non-beadlock wheel depends on the bead staying engaged. Hard cornering or rock hits can push a bead off its seat, so check pressure and bead contact after rough trails. A safety hump is designed to help the bead stay in place, but it does not replace proper mounting.
Inspect the bead seats for dents, scratches and corrosion each season, since a damaged seat can allow a bead to slip. Clean the seat and tire bead before remounting, and use fresh valve stems when a tire is taken off.
- Seat both beads evenly before inflating
- Check bead seats for dents after rough trails
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR41057047143 |
| Style | 410 UTV Bead Grip |
| Wheel type | UTV |
| Wheel size | 15×7 |
| Backspace | 4+3 |
| Bolt pattern | 4 on 136 |
| Finish | Gold |
| Beadlock | No |
| Construction | One-piece 356 aluminum |
| Heat treatment | T6 |
Vehicle fitment
This is a universal fit wheel. The 15×7 size, 4+3 backspace and 4 on 136 bolt pattern decide whether it works on your UTV, so compare those figures before mounting a tire.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Check the package contents against your installation before starting.
Not included: tires.










