Overview
The Method Race Wheels UTV Series 401 Beadlock in 14×7 and black, part MR40147047543B, has a 4 on 136 bolt pattern and a 4+3 backspace. It includes a forged 6061 beadlock ring and carries a 1600 lb load rating.
The 401 is built for serious racers and enthusiasts. The matte black wheel and ring belong to a line available from 12 to 15 inches, so the wheel can be matched to a range of UTV setups.
Method describes its wheels as designed and developed for race and street applications, with a focus on performance. The beadlock design uses the ring to clamp the tire bead to the wheel.
Key features
- Forged 6061 beadlock ring
- Grade 8 zinc plated mounting hardware
- Matte black finish on the wheel and ring
- 4 on 136 bolt pattern in a 14×7 size
- Load rating of 1600 lbs
- Backspace of 4+3
Beadlock rings and UTV use
A beadlock ring clamps the tire bead to the wheel, which lets the tire run at low pressure without slipping off the rim. That matters on sand, rock and mud, where lower pressure gives more grip and a softer ride. The ring and its hardware take the clamping load, so they must be sound before every run.
Beadlock setups need regular attention. Hardware can settle during the first few runs as the tire seats, so re-check the fasteners and retighten them to the correct torque. Look for gaps between the ring and the wheel, bent ring edges or worn bead seats. Keep spare hardware on hand, and replace any fastener that shows thread damage.
- Inspect the ring for cracks or bends
- Check bead seats for wear or pitting
- Re-torque hardware after the first runs
- Keep a tire repair kit and pump in the vehicle
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MR40147047543B |
| Style | 401 Beadlock |
| Wheel size | 14×7 |
| Diameter | 14 inches |
| Backspace | 4+3 |
| Beadlock | Yes |
| Beadlock ring | Forged 6061 |
| Mounting hardware | Grade 8 zinc plated |
| Finish | Matte black |
| Bolt pattern | 4 on 136 |
| Load rating | 1600 lbs |
| Wheel type | UTV |
| Fit type | Universal fit |
Vehicle fitment
Fit depends on the 4 on 136 bolt pattern and the 4+3 backspace matching your UTV’s hub and clearance. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Fasten the beadlock ring and its hardware in the order the beadlock design requires before running the wheel.
What’s included
A forged 6061 beadlock ring and Grade 8 zinc plated mounting hardware.











