Overview
The Method Race Wheels MR705 17×8.5 is a split 5-spoke aluminum wheel for a 5 on 150 bolt pattern, finished in matte black and carrying part number MRWMR70578558500. It belongs to Method’s MR705 Bead Grip series, built for off-road drivers who want to run lower tire pressures without losing the bead.
Lower pressure enlarges the tire’s contact patch, which can help traction on loose ground and soften the ride. Method’s patented Bead Grip design is intended to keep the tire bead engaged when pressure drops. The wheel is solid A356 aluminum with T6 heat treatment, and its inner lip is reinforced with the design from Method’s MRW race wheel. Method rates it for 2650 to 3640 lbs.
Key features
- Split 5-spoke design with 10 windows and a debossed METHOD logo on the face
- Aggressive safety hump on the bead seats to help resist de-beading
- Patented Bead Grip technology for added grip at low tire pressures
- Reinforced inner lip borrowed from the MRW race wheel for extra strength
- Snap-in center cap with embossed Bead Grip logo, plus a push-through cap for 8 lug applications
Running low pressure safely
Airing down widens the tire footprint, which can help on loose or rocky ground. The trade-off is a greater risk of pinch damage and bead movement, so reduce pressure in small steps and watch how the tire settles. A bead grip design adds security, but it does not replace careful driving over sharp obstacles.
Reinflate to road pressure before returning to pavement, and carry a gauge and a compact air source. Inspect the sidewalls and beads after each run for scuffs, cuts or rubber left on the rim. Consistent checks catch small problems before they become a trail failure.
Tire choice matters as much as the wheel. Pick a tire rated for your intended load and sized for the 17 inch rim, and follow the inflation chart published for that tire when setting the pressures you plan to run.
- Lower pressure in small steps
- Carry a tire gauge and air source
- Inspect beads and sidewalls after each run
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR70578558500 |
| Series | MR705 Bead Grip |
| Wheel diameter | 17 inches |
| Wheel width | 8.5 inches |
| Offset | 0 |
| Backspacing | 4.75 |
| Center bore | 111 |
| Bolt pattern | 5 on 150 |
| Style | Split Spoke |
| Finish | Matte Black |
| Construction | Solid A356 aluminum, T6 heat treatment |
| Load rating | 2650 to 3640 lbs |
Vehicle fitment
Method names no vehicles for this wheel. It carries a Universal Fit label, but a 5 on 150 pattern, 111 center bore and 0 offset are the measurements that decide whether it mounts to a given hub, so check them before buying.
Confirm your vehicle’s year, model and trim before ordering. Hub centric wording covers common applications, not one named model.
Installation notes
Compare the 111 center bore with your hub before mounting, since hub centric fit covers only general applications. Set tire pressure with a gauge when running the Bead Grip design, and stay within the low-pressure range that the tire is rated for.
What’s included
The wheel comes with a snap-in center cap embossed with the Bead Grip logo and a push-through cap for 8 lug applications. Lug nuts, valve stems and tires are not part of the package.
Not included: Tires must be bought separately to use this wheel.












