Overview
Method Race Wheels 704 Trail Series, 17×8.5 in Matte Black, part number MRWMR70478560500, uses a 6 on 5.5 bolt pattern with a 106 center bore and 0 offset. Method labels it universal fit and names no particular vehicle, so the hub match needs to be checked before mounting.
This wheel is one-piece cast 356 aluminum with T6 heat treatment. Bead Grip, a patent-pending feature, aims to add tire bead grip at lower air pressures. The bead seat is the ledge the tire bead rests on, and the safety humps help keep the tire stable there. Method built the 704 for off-road racing and says its weight was reduced while strength was increased, with Finite Element Analysis used along the way.
Key features
- Patent-pending Bead Grip feature for better bead grip at reduced pressures
- Reinforced inner lip inspired by race wheel construction
- Bead seat safety humps at the inner and outer edges to stabilize the tire
- One-piece cast 356 aluminum with T6 heat treatment
- Windowed style, Matte Black finish, 8.5-inch width
- Method states lower weight and higher strength were goals
- Finite Element Analysis and field testing shaped the design
Trail use and wheel care
Off-road wheels take hits from rocks, roots and ruts that road wheels rarely see. A reinforced inner lip and bead seat design help with that stress, but the outer barrel, spokes and lip still need periodic looks for cracks. Check the wheel after hard landings or deep ruts, paying attention to the area near the valve stem and bead.
Corrosion can build up where the wheel meets the hub, especially if the vehicle sees salt or mud. Clean the mounting surface during tire service and avoid excess paint or sealant on the hub face. Keep lug threads clean and dry so torque readings stay accurate.
- Look for cracks after hard landings
- Clean the hub face during tire changes
- Re-torque lug nuts after the first few drives
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR70478560500 |
| Series | MR704 Bead Grip |
| Wheel diameter | 17 inches |
| Wheel width | 8.5 inches |
| Bolt pattern | 6 on 5.5 |
| Center bore | 106 |
| Offset | 0 |
| Backspacing | 4.75 |
| Style | Windowed |
| Finish | Matte Black |
| Construction | One-piece cast 356 aluminum, T6 heat treatment |
| Fitment label | Universal Fit |
Vehicle fitment
Universal fit is the only fit information attached to this wheel, and no year, make or model is named. A 6 on 5.5 pattern and a 106 center bore have to match your hub exactly, so check them before fitting. The 0 offset and 4.75 backspacing also affect how the wheel clears brakes and suspension parts.
A bolt pattern is the count of lug holes and the diameter of the circle they sit on. The center bore centers the wheel on the hub. Backspacing is the distance from the mounting face to the inside edge of the wheel.
The wheel is not tied to any generation or model, so verify against your vehicle’s own specifications. Confirm your vehicle’s year, model and trim before ordering.














