Overview
The Method 409 UTV Bead Grip in matte black is a 15×8 wheel with a 4+4 backspace and a 4 on 156 bolt pattern. It is the 15×8 size in the 409 line and uses the same Bead Grip design to engage the tire bead at low air pressures.
The bead seats have an aggressive safety hump designed to resist de-beading. The body is one-piece 356 aluminum with T6 heat treatment, built to keep weight low while holding strength under off-road loads.
A 15×8 wheel has a 15 diameter and an 8 width. The 4+4 backspace sets the distance from the mounting face to the inner edge, and the 4 on 156 bolt pattern places four lug holes on a 156 bolt circle. Those figures, together with diameter and width, decide whether the wheel clears suspension and brakes. The finish is matte black, and the wheel is non-beadlock, so the Bead Grip design and safety hump hold the tire bead. Check the load requirements for your UTV before mounting.
Key features
- Bead Grip design for tire grip
- Aggressive safety hump on bead seats
- One-piece 356 aluminum
- T6 heat treatment
- Matte black finish
- Non-beadlock
Tire width and fender fit
An 8 width rim gives a tire a broader footprint than narrower wheels of the same diameter, and that changes how the tire sits relative to the fender lip. Tread that reaches the edge of the fender at full compression can rub, so check the tire you intend to use on the vehicle, not just the wheel alone.
Tire sidewall height and overall diameter also matter. A taller tire changes the contact patch and can shift steering and gearing feel. Keep the tire size close to what the vehicle was set up for, and recheck fender clearance after changing tire brand or tread.
- Check fender clearance at full steering lock
- Compare overall tire diameter with the original tire
- Recheck clearance after changing tread or brand
- Inspect beads after any slipped tire
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR40958046544 |
| Style | 409 Bead Grip |
| Wheel type | UTV |
| Wheel size | 15×8 |
| Backspace | 4+4 |
| Bolt pattern | 4 on 156 |
| Finish | Matte Black |
| Beadlock | No |
| Construction | One-piece 356 aluminum |
| Heat treatment | T6 |
Vehicle fitment
Match this wheel to your UTV by size, backspace and bolt pattern. Confirm fit for your year, model and trim before ordering, and check the 4+4 backspace against your current wheels.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Only the wheel is included. Hub covers, hardware and tires are not part of the package.
Not included: tires.










