Select your vehicle

MCE Fenders Gen II Flexible Fender Flare Kit (Textured Black) – FFTJG2-6

MCE Fenders

Shop Jeep Wrangler TJ Fender Flares on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Front and rear flare kit for 1997–2006 Jeep Wrangler TJ and 2004–2006 Jeep Wrangler LJ
  • Set of four flares, 6 inches of tire coverage
  • Flexible TPO plastic, textured black
  • Lifetime warranty against cracking for the original buyer
  • Lights not included

Description

Overview

The MCE Fenders Gen II Flexible Fender Flare Kit, part number FFTJG2-6, is a set of four flares covering the front and rear of the 1997–2006 Jeep Wrangler TJ and the 2004–2006 Jeep Wrangler LJ. It provides 6 inches of tire coverage. The flares are molded from flexible TPO plastic in a textured black finish with an OE-like surface.

The patented flares add 1 to 2 inches of extra tire clearance while blending the flat fender look of the original Jeep into the TJ. The TPO material is designed to resist sagging and cracking and is UV-stable. The flares are made in the USA and carry a lifetime warranty to the original buyer against cracking.

A 6-inch kit is the widest coverage in MCE’s Gen II range for these Wranglers. The 3-inch and 4.5-inch options are separate kits, so a buyer running a narrower tire can choose a smaller coverage without giving up the flexible TPO build.

Key features

  • Complete set of four flares, front and rear
  • 6 inches of tire coverage
  • Flexible TPO plastic that MCE says will not sag or crack
  • UV-stable material with a textured black, OE-like surface
  • 1 to 2 inches of extra tire clearance
  • Designed to blend the flat fender look of the original Jeep into the TJ body
  • Made in the USA
  • Lifetime warranty to the original buyer against cracking

Choosing a full set

A full set of four flares changes the look of the whole Jeep, not just one corner. Front and rear pieces should match in width and curve so the body lines run evenly from end to end. Before buying, measure the tires you plan to run and compare them with the coverage the kit gives, since a set that is too wide for the tire can look out of place.

Flexible plastic fenders flex more than metal, which helps them survive trail contact, but the mounting points carry the stress over time. After the first few trips, check the front and rear flares for gaps, cracked clips and bolts that have worked loose. Clean the underside edges as well, because mud can build up there and hide small cracks.

  • Tire width compared with kit coverage
  • Matching gaps at front and rear
  • Clips and bolts after trail use
  • Mud buildup along the underside edge

Specifications

Brand MCE Fenders
Part number FFTJG2-6
UPC 700007161956
Generation Gen II
Material Flexible TPO plastic
Finish Textured black with an OE-like surface texture
Position Front and rear
Quantity Set of 4
Tire coverage 6 inches
Fitment type Direct fit
Origin Made in the USA
Warranty Lifetime, to the original buyer, against cracking

Vehicle fitment

It fits the 2004–2006 Jeep Wrangler LJ, including the Unlimited and Unlimited Rubicon trims, and the 1997–2006 Jeep Wrangler TJ, including the 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X trims.

Other Wrangler generations, such as the YJ, JK and JL, are not covered. Confirm your vehicle’s year, model and trim before ordering.

What’s included

A set of four Gen II flares: front and rear.

Not included: Lights.

SKU: MCEFFTJG2-6 Category:

Specification

Shipping weight 20.00 lbs
Package dimensions 50.00 × 22.00 × 14.00 in
brands

Fitment

VehicleYearsTrims
Jeep Wrangler (LJ)2004–2006Unlimited, Unlimited Rubicon
Jeep Wrangler (TJ)1997–200665th Anniversary Edition, Rubicon, SE, Sahara, Sport, X

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the FFTJG2-6 kit cover both the front and rear of a TJ?

Yes. The kit is a set of four flares for the front and rear, with 6 inches of tire coverage. It fits the 1997–2006 Jeep Wrangler TJ and the 2004–2006 Wrangler LJ, including the trims covered for each model.

Will this kit fit a YJ Wrangler?

No. A YJ needs a separate MCE part, FFYJG2-6, which is made for the 1987–1995 Jeep Wrangler YJ. Use that part number for a YJ, since this kit covers only the TJ and LJ.

Are the lights included with the kit?

No. The kit includes the flexible flares and their mounting hardware only, and the lights are a separate purchase. Plan for lights before installing the set.

Should the factory fender hardware be reused?

Reuse it only if it is in good condition. Look for rust, stripped threads and bent brackets, and replace anything that looks weak. New fasteners and clean mounting surfaces help the flares sit flat and stay secure on rough roads.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Jeep Wrangler TJ Fender Flares on Amazon