Overview
The Smittybilt M1 Flares, part number 17396, are a set of four fender flares for trucks, which Smittybilt titles for the 2017 Ford Super Duty. They add up to 2 inches of tire coverage and give the truck a rugged, off-road look.
The flares are made from OEM-quality ABS that is heat resistant and UV stable, in two composite layers. They can be painted if you choose, and no drilling is required. Smittybilt includes the hardware, rubber gaskets and rivets needed for installation.
Key features
- Set of four flares
- Adds up to 2 inches of protection over the tire
- Dual composite layer ABS construction
- Heat resistant and UV stable material
- Paintable finish
- Robotically trimmed edges
- Stainless steel rivets for mounting
Choosing and fitting flares
Fender flares extend the body over the tire, which keeps mud, gravel and water from spraying the lower panels and hides the tire edge from view. They do not change tire clearance on their own, so a larger tire or a wheel with a different offset can still reach the flare edge. Before mounting, turn the wheels fully left and right and look for contact along the inner lip.
Flares are easier to paint on a bench than on the truck, so decide on the finish before the install. Keep the rubber gaskets and rivets close at hand, and check them periodically, since loose rivets cause rattles and worn gaskets let dirt reach the fender edge. Ask whether the flare sits flush with the body panel, because a gap can trap debris.
- Measure tire clearance with the suspension at full travel
- Clean the mating surface before setting the gaskets
- Recheck rivets after the first rough drives
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | 17396 |
| UPC | 631410136302 |
| Quantity | Set of 4 |
| Material | OEM-quality ABS, dual composite layer |
| Coverage | Up to 2 inches |
| Finish | Paintable |
| Hardware | Stainless steel rivets, rubber gaskets |
| Installation | Direct fit, no drilling required |
Vehicle fitment
The flares are made for the 2017 Ford Super Duty truck. Confirm the exact model, F-250 or F-350, before ordering.
Confirm your truck’s year, model and trim before ordering, and check the fender clearance against your tires.
Installation notes
The fenders are drill-free. Installation uses the included rubber gaskets and stainless steel rivets, so keep the hardware with the set until the flares are mounted.
What’s included
Four fender flares, with rubber gaskets and stainless steel rivets.












