Select your vehicle

Smittybilt Chevrolet Silverado M1 Fender Flare Set (Paintable) – 17292

Smittybilt

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fits 2014–2015 Silverado 1500 and 2015–2016 Silverado 2500 HD and 3500 HD
  • Bolt-on front and rear flares, sold as a set of four
  • 2 inch width coverage
  • Heat resistant, UV stable ABS that is paintable
  • No drilling required

Description

Overview

The Smittybilt Chevrolet Silverado M1 Fender Flare Set, part number 17292, is a set of four paintable bolt-on flares for the 2014–2015 Chevrolet Silverado 1500, the 2015–2016 Silverado 2500 HD and the 2015–2016 Silverado 3500 HD.

Coverage is listed at 2 inches of width. The flares are ABS, which Smittybilt describes as heat resistant and UV stable, and they accept paint. The installation uses the rubber gaskets and rivets in the kit and needs no drilling.

Key features

  • Bolt-on front and rear flares, sold as a set of four
  • 2 inch width coverage
  • Heat resistant, UV stable ABS
  • Paintable
  • No drilling required

Care and fit checks

Bolt-on flares stay in place through the rivets and gaskets, so periodic checks matter more than tools. After the first few drives, look at each rivet and gasket for movement, and confirm the flare edges still sit evenly against the body panel. Wash the flares with mild soap and water, since road grime can hide small cracks in the surface.

Front flares are most exposed to stones and spray, so check them more often than the rear pair. If a flare shifts after a rough trail run, stop and reseat the rivets rather than driving on a loose part. A quick inspection takes only minutes and prevents rattles. Paint can be touched up on the paintable surface, but match the finish to the body color before applying any coat.

Specifications

Brand Smittybilt
Part number 17292
UPC 631410118636
Material ABS, heat resistant and UV stable
Width/coverage 2 inches
Position Front and rear
Quantity Set of four
Finish Paintable
Fit type Direct fit

Vehicle fitment

It fits 2014–2015 Chevrolet Silverado 1500, 2015–2016 Silverado 2500 HD and 2015–2016 Silverado 3500 HD trucks.

Verify the exact year and model before you order.

Installation notes

Mount the flares with the rubber gaskets and rivets supplied in the kit. Drilling is not required.

What’s included

The set includes four bolt-on flares, plus the rubber gaskets and rivets needed to mount them.

SKU: S/B17292 Category:

Specification

Shipping weight 20.00 lbs
Package dimensions 48.00 × 36.00 × 10.00 in
brands

Fitment

VehicleYearsTrims
Chevrolet Silverado 15002014–2015High Country, LT, LTZ, WT
Chevrolet Silverado 2500 HD2015–2016High Country, LT, LTZ, WT
Chevrolet Silverado 3500 HD2015–2016LT, LTZ, WT

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the 17292 set fit a 2015 Silverado 2500 HD?

Yes. It fits the 2015–2016 Chevrolet Silverado 2500 HD. Confirm the exact year, model and trim before ordering, because fit varies by configuration.

Is drilling needed for these M1 flares?

No. The flares are bolt-on and no drilling is required. The set includes the hardware, rubber gaskets and rivets needed to mount them, so the install stays simple.

What width does this flare set cover?

The product specifications list 2 inches of width coverage for the front and rear flares. Each set is sold as four flares, so all four corners are covered.

How do I clean paintable flares without damaging the finish?

Use mild soap, water and a soft cloth. Avoid abrasive pads and strong solvents, which can dull paint or wear the surface. Dry the flares fully before waxing so the coating bonds evenly.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon