Overview
The Smittybilt 17391 is an M1 fender flare set for Ford Super Duty trucks, with flares for the front and rear. Confirm the model years and generation before ordering.
The flares add up to 2 inches of tire coverage and give a rugged, off-road look. The ABS is heat resistant and UV stable, and it can be painted to match a different color.
Key features
- Adds up to 2 inches of tire coverage
- Flare height of 6.25 inches
- Bolt-on design with no drilling required
- All hardware, rubber gaskets and rivets included
- Heat-resistant, UV-stable ABS construction
- Front and rear positions
Painting and finishing ABS flares
Paintable ABS flares need a clean, scuffed surface and a primer made for plastic. Light sanding with fine-grit paper helps the coat bond, and wiping with a plastic-safe cleaner removes oils from handling. Apply thin coats rather than one heavy coat so the finish does not run or crack at the edges.
Fender flares take regular road abuse, so a painted finish should be checked for chips and lifting edges. Touch up exposed plastic quickly, since moisture under a chipped coat can lead to peeling. Rubber gaskets should be inspected at the same time, because a worn gasket lets dirt and water reach the mounting points.
- Sand lightly and clean before priming
- Use a primer suited to plastic
- Check edges and mounting points each season
- Replace worn gaskets as they harden
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | 17391 |
| UPC | 631410115611 |
| Position | Front and rear |
| Tire coverage | Up to 2 inches |
| Flare height | 6.25 inches |
| Material | OEM-quality ABS, heat resistant and UV stable |
| Finish | Paintable |
| Installation | Bolt-on, no drilling required |
| Included | Hardware, rubber gaskets and rivets |
Vehicle fitment
Model years and truck generation are not confirmed for this set. Check the Super Duty year and generation before choosing these M1 flares.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The flares are bolt-on and need no drilling, and the included rubber gaskets and rivets are part of the installation kit.
What’s included
A set of M1 fender flares for the front and rear, with all hardware, rubber gaskets and rivets.














