Select your vehicle

LUND Rocker Guards (Black Rubber) – 5821594

Lund

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fits the 2014-2018 Chevrolet Silverado 1500 in the trims named in the manufacturer fitment list
  • Lund part 5821594 rocker guards in black rubber
  • Rhino lined polyurethane with adhesive backing
  • Pre-cut for easy installation with no cutting or drilling required
  • Limited lifetime warranty

Description

Overview

The Lund rocker guards, part 5821594, are black rubber side panel guards for the 2014-2018 Chevrolet Silverado 1500. They cover the rocker panels and lower doors to help keep rocks and flying debris from scratching and denting the paint. Lund makes them from Rhino lined polyurethane and designs each set for the vehicle it is made for.

The guards are a direct fit rather than a universal guard, and they come pre-cut with an adhesive backing. Lund describes them as premium guards that protect the paint while keeping the truck looking good over the long term.

Key features

  • Rhino lined polyurethane construction
  • Adhesive backing for mounting
  • Pre-cut for easy installation
  • No cutting or drilling required
  • Black rubber finish
  • Large size set
  • Limited lifetime warranty

Keeping the paint protected

Rocker guards work by taking the hits from rocks, gravel and thrown debris that would otherwise reach the lower body panels. The bottom edge of a side panel is where road spray, salt and grit collect, so a guard that stays bonded keeps that area covered. Adhesive mounting depends on a clean, dry surface, so cleaning the panel and removing wax or road film before fitting helps the backing hold.

Once installed, check the edges after the first few washes and after rough trail use. If an edge lifts, press it back down before water or dirt works under it. High pressure washing aimed directly at an edge can loosen adhesive, so spray at an angle. Before choosing a set, compare the vehicle year, model and trim against the fit details so the panels match the body lines.

Specifications

Brand Lund
Part number 5821594
UPC 725478154900
Type Plastic guard
Material Rhino lined polyurethane
Finish Black rubber
Size Large
Fitment Direct fit
Installation type No cutting or drilling required
Warranty Limited lifetime
Made in U.S.A.

Vehicle fitment

The manufacturer fitment list covers the 2014-2018 Chevrolet Silverado 1500 in the High Country, LS, LT, LTZ, SSV and WT trims.

Silverado 2500 HD and 3500 HD models and GMC Sierra trucks are not in the list. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

These guards are adhesive mounted and need no cutting or drilling. No mounting hardware is listed with the set.

What’s included

A pre-cut set of Lund rocker guards in black rubber, with adhesive backing.

SKU: LII5821594 Category:

Specification

Shipping weight 4.00 lbs
Package dimensions 57.80 × 12.30 × 1.90 in
brands

Fitment

VehicleYearsTrims
Chevrolet Silverado 15002014–2018High Country, LS, LT, LTZ, SSV, WT

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the Lund 5821594 rocker guards fit a 2019 Silverado 1500?

The manufacturer fitment list covers only the 2014-2018 Chevrolet Silverado 1500, in the High Country, LS, LT, LTZ, SSV and WT trims. A 2019 or newer truck is not in that list, so check your year, model and trim before choosing a set.

What material are these rocker guards made from?

Lund makes the guards from Rhino lined polyurethane, a durable material that helps protect the paint on the rocker panels and lower doors from rocks and flying debris. The set has an adhesive backing.

Do these guards need cutting or drilling to install?

No. Lund lists them as requiring no cutting or drilling, and the guards come pre-cut with adhesive backing. No mounting hardware is listed with the set.

Can rocker guards be removed without damaging the paint?

Often yes, if the removal is slow and careful. Warm the guard gently, lift one edge, and peel at a low angle so the adhesive releases without pulling paint. Remove leftover residue with a remover that is safe for automotive paint, then wash the area. A fresh surface clean is needed before any reinstall.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon