Overview
The K&N 62-1490 is a crankcase vent filter with a steel base and zinc vent tubes. The one-piece body has a rubber or chrome top. Studded models mount remotely on vent hoses and clamps, while models without studs press directly into rubber grommets in valve covers.
Because the filter is universal fit, no particular year, make or model applies. Pick the mounting style that matches your engine’s valve covers or remote hose layout.
Key features
- Vent tubes added to a steel base
- One-piece design with a rubber or chrome top
- Studs allow remote mounting with vent hoses and clamps
- Direct-mount filters press into rubber grommets in valve covers
- Chrome plated baseplate and zinc tubes
How crankcase vents work
A crankcase vent filter lets pressure leave the engine while keeping oil mist from escaping with it. Over time the element collects oil and grime, and a restricted vent can push pressure into seals and gaskets, which often shows up as oil weeping at the valve cover or around the front and rear seals. Look at the filter during oil changes and clean or replace it once it looks saturated.
On a remote setup, the hoses and clamps are part of the system. Hoses that harden or swell from oil exposure can crack, and loose clamps can slip as the engine moves. Check each run for sag, since low spots can trap liquid and restrict airflow through the vent.
- Inspect the valve cover grommet for cracks before pressing a direct-mount filter in
- Replace hoses that have hardened or swelled
- Tighten clamps so they hold through engine movement
Specifications
| Brand | K&N |
|---|---|
| Part number | 62-1490 (also written K/N62-1490) |
| UPC | 24844015402 |
| Type | Crankcase vent filter |
| Base | Steel |
| Tubes | Zinc |
| Baseplate | Chrome plated |
| Top | Rubber or chrome |
| Design | One-piece |
| Fitment | Universal fit |
Vehicle fitment
This is a universal fit vent filter, so no vehicle year, make or model is matched. Fit depends on whether your engine uses a valve cover grommet or a studded remote hose run.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
For remote mounting, the studs take vent hoses and clamps. For direct mounting, the filter presses into a rubber grommet in the valve cover.
What’s included
The package covers the filter only. Vent hoses and clamps are not part of the package. Not included: vent hoses and clamps needed for studded remote mounting.









