Overview
The K&N Universal Rubber Filter (Natural), part number K/NRU-3110 and model RU-3110, is an air filter with a molded rubber flange for universal-fit air intakes. K&N builds its universal filters for many kinds of equipment, including racing vehicles, radio-controlled cars, generators, snowmobiles and tractors, so this filter is not designed around one make or model.
The flange does the sizing work. It is pliable, absorbs vibration and holds the filter securely on the intake, and it can be stretched up to 1/16 inch (1.5mm) to fit between standard diameters. The filter is washable and reusable.
Key features
- Universal fit for a wide range of air intake openings
- Ultra-strong molded pliable rubber flange
- Flange absorbs vibration and seals securely on the intake
- Stretches up to 1/16 inch (1.5mm) to fit in-between sizes
- Washable and reusable
Inspecting the flange seal
The flange is the part that does the sizing and sealing work on this kind of filter, so its condition matters as much as the media. Over time rubber can harden, flatten or take a permanent set, and a flange in that state may no longer hold the filter square on the intake. Inspect it at each cleaning and check for cracks, uneven edges and flat spots.
Rubber also reacts to oil, fuel and heat, so keep the flange away from those when cleaning the filter. If the filter sits loosely after fitting, check the intake opening before blaming the filter, since a small mismatch can often be fixed by reseating the flange evenly. Replace the filter when the flange no longer grips or the seal cannot be restored.
- Check for cracks and flat spots
- Keep oil and fuel away from the rubber
- Reseat the flange evenly after fitting
- Replace a flange that no longer grips
Specifications
| Brand | K&N |
|---|---|
| Part number | K/NRU-3110 |
| Model | RU-3110 |
| Type | Universal rubber air filter |
| Flange | Molded pliable rubber, stretchable up to 1/16 in (1.5 mm) |
| Finish | Natural |
| Fitment | Universal Fit |
Vehicle fitment
It is a universal fit filter and is not sized for a specific vehicle. Match it to your equipment by checking the intake opening diameter and offset against the flange’s stretch range.
The flange covers size differences up to 1/16 inch (1.5mm). Check that your intake falls within that range before fitting.
Installation notes
Measure the intake opening before fitting, because the flange is the only sizing adjustment on this filter. Stretch it no more than the stated 1/16 inch (1.5mm), or the seal may loosen on the intake.
What’s included
The product is the single K&N universal rubber air filter. No accessories are listed.









