Overview
The K&N 62-1170 is a steel base crankcase vent filter, a breather for the engine crankcase with vent tubes added to its base. It is built as a one piece unit with a rubber or chrome top and can be fitted two ways: mounted remotely on vent hoses, or pressed directly into a rubber grommet in a valve cover.
It is universal fit, so it is not tied to a particular year, make or model. Which mounting method works depends on how your engine is set up for breather venting.
Key features
- One piece steel base with vent tubes added
- Rubber or chrome top
- Studded version mounts remotely and needs vent hoses and clamps
- Direct mount version presses into rubber grommets in valve covers
- Chrome plated baseplate and zinc tubes
Signs the vent system needs attention
The crankcase vent system works quietly, so problems tend to show up as oil in unexpected places. Watch for oil mist on the underside of the hood, oil seeping from the valve cover, or a whistling sound at the breather. These signs point to a blocked filter, a damaged grommet or a loose hose.
Before replacing the filter, confirm the valve cover is sealed and the hoses are free of kinks. Remote mounts can collect oil in low spots, so check the lowest part of the hose run. Keeping the system clear helps the engine breathe as designed and limits oil leakage, and recording what you find at each service makes trends easier to see.
- Look for oil mist under the hood
- Check hoses for kinks and low spots
- Confirm the valve cover seals
Specifications
| Brand | K&N Filter |
|---|---|
| Part number | 62-1170 |
| UPC | 24844015150 |
| Base material | Steel |
| Top | Rubber or chrome |
| Baseplate finish | Chrome plated |
| Tube material | Zinc |
| Design | One piece |
Vehicle fitment
It is universal fit and is not tied to a specific vehicle. Compatibility depends on whether your engine has a valve cover grommet for direct mounting or a workable route for vent hoses in remote mounting.
No specific year, make or model is named for this filter. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Remote mounting requires vent hoses and clamps, which are needed separately. Direct mounting presses the filter into a rubber grommet in the valve cover, so check that grommet before pressing it in. Keep vent hoses clear of hot engine parts and moving belts.
What’s included
A K&N 62-1170 crankcase vent filter. Not included: vent hoses and clamps, which remote mounting requires.









