Overview
The K&N 63-3087 is a 63 Series Aircharger intake kit that replaces the factory airflow assembly, including the filter, air box and air path, with a high density polyethylene inlet tube and a washable oil-type filter. It is a cold air intake with an estimated gain of 24 HP. Confirm compatibility for your vehicle before choosing this kit.
The kit suits owners who want a complete intake replacement rather than a filter swap. The power gain is an estimate of 24 HP and is not a measured result. The filter is designed to be washed and reused over the life of the vehicle instead of being replaced at set intervals.
Key features
- Replaces the factory filter, air box and air path as one assembly
- Free-flowing high density polyethylene tube
- Cold air intake design with a partial enclosure filter housing
- Washable, reusable lifetime air filter
- Backed by K&N’s Million Mile Warranty
- Estimated gain of 24 HP
- Made in the U.S.A.
- Not legal for highway use where California emission regulations apply
Reusable filter upkeep
A washable filter is only as good as its cleaning routine. Remove the filter at regular service points, rinse out loose dirt and let it dry completely before adding oil. Oiling too heavily can restrict airflow, while too little leaves the media open to dust, so apply an even light coat.
Because this kit replaces the factory air box and air path, the new tube is the main sealed route for air. Check its joints and the housing seal whenever the filter is serviced, and look for hairline cracks where the tube bends. Keep a spare filter if the vehicle sees heavy dust, since swapping in a clean element is quicker than cleaning on a dusty job.
- Rinse dust out before soaking
- Let the filter dry fully before oiling
- Inspect the tube bends for cracks
Specifications
| Brand | K&N Filter |
|---|---|
| Product line | K&N 63 Series Aircharger Kit |
| Part number | 63-3087 |
| UPC | 24844358660 |
| Intake type | Cold air |
| Filter housing type | Partial enclosure |
| Filter type | Oil |
| Inlet tube | Included, high density polyethylene |
| Filter life | Washable and reusable, lifetime |
| Estimated power gain | 24 HP |
| Warranty | Million Mile Warranty |
| Fitment type | Direct fit |
Vehicle fitment
Fitment for the K&N 63-3087 is not yet confirmed for any vehicle. Confirm your vehicle’s year, model and trim before deciding.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
K&N gives a typical installation time of 90 minutes or less. Because the kit takes the place of the factory air box and air path, the stock parts come out before the new tube and filter go in.
What’s included
The inlet tube is included, along with the washable K&N air filter. The kit is a full replacement for the factory airflow assembly, so the stock filter, air box and air path are not kept.









