Overview
The K&N 57-2546-1 is an open-housing cold air intake kit for the 2003–2005 Ford Excursion and the 2003–2007 Ford F-250 Super Duty and F-350 Super Duty. It uses a high density polyethylene tube and a washable, reusable oil-type filter in place of the factory airflow assembly.
The kit replaces the stock filter, air box and air path with an open-housing cold air layout. Estimated gain is 16 HP, and a horsepower increase is guaranteed. The kit carries the Million Mile Warranty, is made in the U.S.A., and is 50-state legal under CARB E.O. # D-269-34.
Key features
- Open filter housing for a cold air intake layout
- Free-flowing high density polyethylene tube
- Washable, reusable oil-type filter with a lifetime service life
- Estimated gain of 16 HP
- Inlet tube included
- Made in the U.S.A.
- Million Mile Warranty from K&N
Airflow and engine response
A cold air intake pulls air from outside the engine bay, which can help the engine breathe more freely under load. The open housing used here exposes the filter directly to incoming air, so the filter’s condition matters more than it would with a sealed box. Cleaning and oiling the filter at regular intervals keeps airflow consistent. Because this kit replaces the stock air box and air path, check the tube seating and clamps after installation.
Owners who tow or haul often find that an intake change is one part of a broader setup. Exhaust, tuning and cooling each shape how the engine responds, and a new intake alone will not change those systems. Check hoses and clamps during oil changes, and watch for dirt on the filter after rough trail work or dusty job sites.
Specifications
| Brand | K&N Filter |
|---|---|
| Part number | 57-2546-1 |
| UPC | 24844232229 |
| Intake type | Cold air |
| Filter housing type | Open |
| Filter type | Oil (washable, reusable) |
| Inlet tube | Included |
| Tube material | High density polyethylene |
| Estimated horsepower gain | 16 HP |
| CARB E.O. number | D-269-34 (50-state legal) |
| Warranty | Million Mile Warranty |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2003–2005 Ford Excursion in Eddie Bauer, Limited, XLS and XLT trims, the 2003–2007 Ford F-250 Super Duty in Harley-Davidson Edition, King Ranch, Lariat, XL and XLT trims, and the 2003–2007 Ford F-350 Super Duty in Harley-Davidson Edition, King Ranch, Lariat, XL and XLT trims.
Model years outside the listed ranges and other Ford models are not covered by this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
K&N puts typical fitting time for the 57-2546-1 at 90 minutes or less. Because the factory air box and air path are replaced, let the engine cool before disconnecting the stock assembly.
What’s included
The kit includes the inlet tube and the washable, reusable K&N filter.









