Overview
The Kleinn Train Horns Train Horn 141 (part number 141) is a chrome plated zinc alloy train horn with a 160 psi maximum input. It is universal fit and is not built for a specific vehicle.
The 141 runs on a Vortex 4 12-volt DC solenoid and is rated 149.2 dB at 100 psi and 150.3 dB at 150 psi. A separate compressor and air tank are needed to operate it.
Key features
- Chrome plated zinc alloy finish
- Vortex 4 12-volt DC solenoid
- Rated 149.2 dB at 100 psi and 150.3 dB at 150 psi
- Maximum input of 160 psi
- Universal fit
Caring for chrome finish
A chrome plated zinc alloy finish looks best when it is kept clean and dry. Road salt, mud and wet leaves can sit on the surface and start to dull the plating, especially around the edges and seams. A routine wipe-down after wet or salty drives keeps the finish in good shape and makes corrosion easier to spot early.
Plating can be damaged by abrasive cleaners and hard scrubbing, so use a soft cloth and mild soap. Look for pitting, bubbling or spots where the plating has worn through, since these areas can let moisture reach the base metal. Keep the mounting hardware tight so the horn does not rub or chip its finish against nearby parts.
- Wipe down after wet or salty drives
- Use mild soap and a soft cloth
- Avoid abrasive pads and harsh cleaners
- Check edges and seams for pitting
Specifications
| Brand | Kleinn Train Horns |
|---|---|
| Part number | 141 |
| UPC | 854508003069 |
| Finish | Chrome plated zinc alloy |
| Maximum input | 160 psi |
| Output at 100 psi | 149.2 dB |
| Output at 150 psi | 150.3 dB |
| Solenoid | Vortex 4, 12-volt DC |
Vehicle fitment
The 141 is universal fit and is not matched to a year, make or model. Confirm the mounting position and air system suit your vehicle before ordering.
What’s included
The compressor and air tank are not included, so check the package contents against your installation before starting.
Not included: the compressor and air tank.












