Overview
The ICON Vehicle Dynamics Vector 6 is a 17×8.5 aluminum split spoke wheel in satin black, part number ICO2417856350SB, built on a 6 on 135 bolt pattern with offset 6 and backspacing 5. It suits truck and SUV owners who want an aggressive spoke look, and it is universal fit, so it is not built for one vehicle. Match the bolt pattern and center bore to your hub before you choose it.
The Vector 6 pairs sharp lines with a spoke design and a featureless lip that resists debris. Its ICON-optimized dimensions, with backspace and offset set to reduce scrub radius, are aimed at better handling and ride quality. The wheel is designed with suspension in mind.
Key features
- Split spoke design with sharp lines and an aggressive spoke pattern
- Featureless lip that ICON says is easier to clean
- 6 on 135 bolt pattern with center bore 87
- Offset 6 and backspacing 5 for wheel position
- 17 Inches diameter and 8.5 Inches width
- Satin black finish on aluminum construction
Choosing a 6 on 135 setup
Six-lug patterns carry the wheel on more studs than five-lug layouts, which spreads load across the hub. Center bore matters just as much. A wheel with a bore that does not match the hub pilot can sit off-center and cause vibration even when the studs fit. Measure the hub before buying and plan for hub-centric rings if the bore is larger.
Satin black finishes resist fine scratches but show brake dust and road grime. Clean with a non-abrasive cleaner and a soft brush, then rinse thoroughly. Avoid abrasive pads, which can dull the finish. After the first few drives, recheck the lug nuts and look for any seating movement.
- Verify bolt pattern and center bore on the hub
- Use a non-abrasive cleaner on the satin finish
- Recheck torque after the first drive
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | ICO2417856350SB |
| Series | Vector 6 |
| Style | Split Spoke |
| Wheel diameter | 17 Inches |
| Wheel width | 8.5 Inches |
| Bolt pattern | 6 on 135 |
| Center bore | 87 |
| Offset | 6 |
| Backspacing | 5 |
| Finish | Satin Black |
| Construction | Aluminum |
| Fitment | Universal fit |
Vehicle fitment
No model or year is attached to this wheel, so the decision rests on bolt pattern, center bore, offset and backspacing. Compare the 6 on 135 pattern with the hub on your truck or SUV before ordering a set. Manufacturer specifications are the place to check any vehicle-specific detail.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A 6 on 135 pattern with an 87 center bore needs a matching hub, and the studs should suit the wheel before the vehicle is driven. Recheck lug nut tightness after the first drive, since a new wheel can seat differently on the hub.
What’s included
Confirm which tires, lug nuts and caps your installation needs before ordering.


