Overview
The Icon Alloys Rebound Pro 21817858357SB is a 17×8.5 aluminum wheel in satin black with a 6 on 5.5 bolt pattern. It has a wheel offset of 25 and a backspacing of 5.75, and it is sized by wheel dimensions rather than by vehicle.
The Rebound PRO uses InnerLock, a patent-pending bead retention system that keeps the tire bead secured to the wheel at low tire pressures while remaining DOT compliant. Traditional beadlock wheels typically need frequent maintenance and specialty tools, add rotational mass, and are generally limited to off-road use.
The wheel has been tested under a modified version of the FMVSS No. 139 tire bead unseat resistance test, run at 10 psi. It did not de-bead the tire up to the test machine’s limit of over 7600 lbs of load.
Key features
- InnerLock bead retention system, which ICON says is fully DOT compliant
- Aluminum construction, satin black finish
- 17×8.5 size with a 6 on 5.5 bolt pattern
- Offset of 25 and backspacing of 5.75
- Designed to maximize caliper clearance.
- Backspace and offset intended to reduce scrub radius and improve handling and ride quality, ICON says
- 3,200 lb load rating.
Choosing wheel offset and width
Offset and backspacing decide where the wheel sits in the fender and how far the tire reaches toward the suspension and brakes. Moving to a wider wheel or a different offset changes scrub radius and steering feel, so a change in either should be checked through full steering and suspension travel. Tire size matters too: the overall diameter affects speedometer reading and the space the tire needs in the wheel well.
Bead retention systems are about keeping the tire seated when pressures drop, which is useful for slow trail runs. Still, a bead retention wheel does not replace correct inflation and sensible speed. Inspect the bead area and valve stem after rough trail sessions, and check lug nut torque after the first drives on new wheels.
Specifications
| Brand | ICON Vehicle Dynamics (Icon Alloys) |
|---|---|
| Part number | ICO21817858357SB (21817858357SB) |
| Product type | Wheel |
| Style | Rebound Pro |
| Wheel diameter | 17 inches |
| Wheel width | 8.5 inches |
| Bolt pattern | 6 on 5.5 |
| Offset | 25 |
| Backspacing | 5.75 |
| Construction | Aluminum |
| Finish | Satin black |
| Load rating | 3,200 lb load rating. |
| Fitment type | Universal fit |
Vehicle fitment
Fit depends on wheel dimensions rather than one specific vehicle. Confirm your vehicle’s year, model and trim before ordering, and check the bolt pattern, offset and hub bore against your setup.
Wheel fitment depends on bolt pattern, offset, hub bore, brake caliper clearance and tire size. This wheel has a 6 on 5.5 bolt pattern, so confirm that your vehicle uses the same pattern. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Have the tires or wheels mounted and balanced by a qualified tire shop, and use inflation, load and speed ratings that suit the tire fitted.
- Confirm the wheel diameter, width and offset suit the tire, and check clearance to the fenders, suspension and brakes through full steering and suspension travel.
- Torque lug nuts to the specification for your vehicle with a torque wrench, in a star pattern.
- Re-check lug nut torque after the first miles of driving.
- If the vehicle has a tire pressure monitoring system, make sure it works with the new setup, and check the speedometer calibration if the overall tire diameter changes.
- Have the alignment checked after changing tire or wheel size or after any suspension work.
What’s included
One 17×8.5 Rebound Pro wheel in satin black.
Not included: Tires and lug nuts are separate from the wheel itself.



