Overview
The KC HiLites 73407 is a hood mount light bracket set for the 2007-2018 Jeep Wrangler (JK), designed to attach a 20 inch KC C-Series LED light bar or a 20 inch KC FLEX light bar to the factory hood.
The Hood Bracket Mount Set is designed for the 20 inch 120W C-Series LED light bar or the 20 inch KC FLEX, attaching to a factory 07-16 Jeep JK hood. The brackets are black powder coat steel and fit both 2-door and 4-door models.
Key features
- Hood-mounted brackets for a 20 inch light bar
- Compatible with KC 20 inch C-Series C20 LED and 20 inch KC FLEX light bars
- Fits the factory hood on 2-door and 4-door models
- Black powder coat steel construction
- Fits the Jeep Wrangler (JK)
Hood mount clearance
Any bracket on the hood changes how the hood closes and how much room there is for the light bar. Check that the hood opens and latches fully with the bracket and light bar fitted, and that the bar does not contact the hood latch, the hood prop or the windshield washer nozzles. Keep the bar’s mounting bolts tight, since vibration on trails can loosen them.
Route the light wiring along the hood frame with clips, leaving slack at the hinge area so the wire is not stretched when the hood opens. Use fuses and a relay close to the battery, and keep the harness away from the hot engine. Re-check bolts and clips after the first few drives and after each rough trail outing, and watch for signs of stress at the bracket welds.
Specifications
| Brand | KC HiLites |
|---|---|
| Part number | 73407 |
| UPC | 84709734077 |
| Product type | Hood mount light bracket set |
| Material and finish | Steel with black powder coat |
| Compatible light bars | KC 20 inch C-Series C20 LED and 20 inch KC FLEX |
| Body styles | 2-door and 4-door models |
| Mounting location | Factory hood |
Vehicle fitment
It fits 2007-2018 Jeep Wrangler (JK) models in all trims, including the Unlimited.
The bracket is designed for the factory 07-16 JK hood, so check the hood design if you have a 2017 or 2018 JK. It is made for the Wrangler (JK) only, not the Wrangler (TJ), Wrangler (JL) or Gladiator.
Installation notes
Lighting installation involves wiring, so use a fused circuit with a relay and a properly rated switch, and route and secure wiring away from heat and moving parts. Disconnect the battery before working on the electrical system and follow the installation steps included with the bracket. Aim the lights correctly and check local regulations on auxiliary lighting and on-road use before driving. Make sure the light and its mounting do not block the driver’s view, required lighting or hood operation, and re-check the mounting and wiring after the first miles of driving.
What’s included
The hood bracket mounting set, part number 73407.
Not included: The 20 inch light bar, wiring, relay and switch.









