Overview
The KC HiLites Light Mount Tube Clamp, part number 73071, is a universal tube clamp that holds auxiliary lights on round metal tubing. It fits tubes from 1.75 in to 2 in and comes as a pair. It can attach to bumpers, grille guards, light bars and roof racks.
The clamp is made from glass filled nylon composite instead of steel, which is impact resistant and waterproof. Each clamp comes with rubber adjustment shims for fine-tuning how the light sits. It is designed to mount KC lights and various aftermarket lights.
Key features
- Clamps onto tubes from 1.75 in to 2 in in diameter
- Glass filled nylon composite body, described by the brand as impact resistant and waterproof
- Rubber adjustment shims for accurate fitment and light position
- Designed to universally mount KC lights and various aftermarket lights
- Works on almost any piece of tubular metal, including bumpers, grille guards, light bars and roof racks
- Sold as a pair, giving two light tabs
Measuring tubing and placement
Tube clamps work only when the tubing matches the clamp’s range. Measure the outside diameter of the tube, not the inside, and take readings at more than one point, since a dented or bent section can give a false size. Pick a spot where the tube is straight and firmly anchored, so the light does not sway when the vehicle flexes on uneven ground.
Once the clamp is on, the shims let you fine-tune the angle of the light. Set the aim with the vehicle parked on level ground, then retighten and recheck after the first few drives, since vibration can shift a light that was set loosely.
- Measure outside tube diameter at several points
- Avoid dented or bent tube sections
- Choose a straight, firmly anchored spot
- Recheck aim after the first few drives
Specifications
| Brand | KC HiLites |
|---|---|
| Part number | 73071 |
| UPC | 84709730710 |
| Material | Glass filled nylon composite |
| Tube diameter | 1.75 in to 2 in |
| Included | Rubber adjustment shims |
| Quantity | Sold as a pair |
Vehicle fitment
It is universal fit, so it is not tied to a make, model or model year. Fit depends on tube diameter and mounting location, so measure the tubing first. Check fit against your vehicle’s year, model and trim before buying.
Measure your bumper or grille guard tubing and confirm it falls within 1.75 in to 2 in before ordering.
Installation notes
Use the rubber shims to fine-tune the fit and aim of each light before tightening the clamp. The clamp is made for tubular metal, so flat mounting surfaces are outside what the product is designed for.
What’s included
Two tube clamp mounts with rubber adjustment shims, sold as a pair.
Not included: Auxiliary lights. The clamps are designed to hold KC or aftermarket lights that you supply.












