Overview
The KC HiLites 7301 is a black two-piece light mount bracket for 1.25 to 1.5 inch diameter round tubing. It is a tube clamp that holds a light or another accessory on the tube. It is not made for a specific vehicle, so the tubing diameter decides whether it fits.
The clamp is built from glass filled nylon composite and comes with rubber mounting spacers and hardware. It is listed individually.
Key features
- Fits 1.25 to 1.5 inch diameter round tubing
- Two-piece clamp design
- Glass filled nylon composite body
- Rubber mounting spacers included
- Hardware included
Clamping to round tubing
Nylon composite clamps grip round tubing through friction and the rubber spacers, so the tube surface matters. Clean off dirt, paint flakes and grease at the clamp spot, then check that the spacers sit flat on the tube. Composite clamps can crack if they are overtightened, so tighten the hardware evenly rather than forcing it.
Think about the light’s weight before choosing the clamp. A heavier fixture adds leverage on a tube and will shift the clamp sooner than a light one. Keep the mount clear of tube bends and welds, and recheck the clamp hardware after rough trail runs to catch any slipping early.
- Clean the tube at the clamp spot
- Seat rubber spacers flat on the tube
- Tighten evenly to avoid cracking composite
- Recheck hardware after rough trail runs
Specifications
| Brand | KC HiLites |
|---|---|
| Part number | K/C7301 |
| UPC | 84709073015 |
| Color | Black |
| Mounting type | Tube mount |
| Tube diameter | 1.25 to 1.5 inch round tubing |
| Material | Super Tough Glass Filled Nylon Composite |
| Clamp type | Two-piece with rubber mounting spacers |
Vehicle fitment
This is a tube clamp rather than a vehicle-specific part, and no vehicle list is published. Its fit is set by tubing diameter, so measure the tube before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure the tube first, since the clamp is sized for 1.25 to 1.5 inch round tubing and a larger or smaller tube will not suit it. The two clamp halves close around the tube, and the rubber mounting spacers are supplied with them.
What’s included
One two-piece clamp with rubber mounting spacers and hardware.
Not included: The light or accessory being mounted.









