Select your vehicle

High Lifter Products Front Forward Control Arms (Red) – MCFFA-RZR1-R

High Lifter Products

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • High Lifter Products red front forward control arms, part number HLPMCFFA-RZR1-R
  • Arched lower control arms for Polaris RZR XP models from 2014 to 2016, including the Turbo
  • Bolt on like the factory arm, with clearance from arching in two places
  • Works with High Lifter 2-inch lift kits
  • Turbo and FOX Edition models require removing the front sway bar

Description

Overview

The High Lifter Products red front forward control arms (part number HLPMCFFA-RZR1-R) are arched lower control arms for Polaris RZR XP models from 2014 to 2016, including the RZR XP 4 1000 and the 2016 RZR XP Turbo. High Lifter arches the lower control arm in two places to follow the angle of the axle and maximize ground clearance.

High Lifter says each arm bolts on exactly like the factory arm, and that the kit works with its 2-inch lift kits.

Key features

  • Lower control arm arched in two locations for added ground clearance
  • Arch follows the angle of the axle
  • Bolts on like the factory arm
  • Works with High Lifter 2-inch lift kits
  • Red finish

Arm geometry and ground clearance

A lower control arm locates the wheel and carries load between the frame and the knuckle. Arching the arm changes its angle, which can raise the frame-side mount and add ground clearance near the axle. Because the arm affects camber and caster, alignment should be checked after any change to control arm position or height.

Control arms are often replaced with other suspension parts together. Worn ball joints, bushings and tie rod ends can make a new arm feel loose, and they can change alignment faster. Inspect the joints and bushings during installation, and keep the lift setup in mind when choosing tires and steering components.

  • Ball joint and bushing condition
  • Alignment after installation
  • Sway bar removal where required
  • Tie rod ends and steering components

Specifications

Brand High Lifter Products
Part number HLPMCFFA-RZR1-R
Finish Red
Arm type Front forward, arched lower control arm
Lift compatibility High Lifter 2-inch lift kits

Vehicle fitment

It fits the 2014 to 2016 Polaris RZR XP 1000 and RZR XP 4 1000, and the 2016 RZR XP 4 Turbo and RZR XP Turbo. RZR models from other years and the RZR 900 family are not covered.

The RZR 900 and other Polaris models are not on this list. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

On RZR Turbo and FOX Edition models, remove the front factory sway bar before installing, since the sway bar does not work with this kit on those models. Lower control arms affect alignment, so have it checked after installation.

What’s included

The red front forward control arms. Check the hardware in your kit against the installation steps before starting.

Fitment

VehicleYearsTrims
Polaris RZR XP 10002014–2016EPS Base, EPS Fox Edition Base, EPS High Lifter Edition Base
Polaris RZR XP 4 10002014–2016EPS Base
Polaris RZR XP 4 Turbo2016EPS Base
Polaris RZR XP Turbo2016EPS Base

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Which RZR models do the red forward control arms fit?

High Lifter lists them for the 2014 to 2016 RZR XP 1000 and RZR XP 4 1000, plus the 2016 RZR XP 4 Turbo and RZR XP Turbo. Other years and the RZR 900 family are not on the list.

Do I need to remove the sway bar?

On RZR Turbo and FOX Edition models, yes. The front sway bar will not work with the arms on those models, so remove it before installing.

Do these control arms work with High Lifter lift kits?

Yes, they work with the 2-inch lift kits. Confirm the lift kit matches your RZR model and year before ordering.

How often should the control arm joints be checked?

Check them during regular service and after rough trail use or impacts. Look for play in the joints, torn boots and cracked bushings, and listen for clunks when turning or crossing ruts.

Do control arms need an alignment check?

Yes. Changing the arm position can change camber, caster and toe, so have the alignment checked after installation. Recheck alignment after any tire or steering change.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon